Surface Mounted Pumps-HD

CMG 80-250A Centrifugal pump415v 50Hz55KwFlow of up to 4000 Litres Per Minute MaximumHead of up to 90 Metres Head Maximum100mm 4" BSP Female Outlet80mm 3" BSP Female InletLiquid temperature -10 to 90 DegreesExamples of use - heating and air conditioning systems, water supply and irrigation

EACA 3" Stainless Steel SELF PRIMING PUMP 415v.Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal. *Available upon request PORT - 3" Max Solids - 19mm H x W x L - 400 x 280 x 635 LM/HM - 750/25 kW - 4

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 5.5kw. 1100res per min maximum, 26 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4KQA EADM(HG4)Centrifugal Impeller415v 50Hz5.5Kw1100 Litres Per Minute Maximum26 Metres Head MaximumMaximum suction 6 MetresApprox 12mm solids handling3" BSP Female Inlet & OutletH 405mm x W 280mm x L 650mm65.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.4" ports. 4kw. 1650 litres per min maximum, 12 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4KQA EAFE(HG4A)Centrifugal Impeller415v 50Hz4Kw1650 Litres Per Minute Maximum12 Metres Head MaximumMaximum suction 6 MetresApprox 20mm solids handling4" BSP Female Inlet & OutletH 400mm x W 315mm x L 670mm64KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 7.5kw. 1300res per min maximum, 32 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3XR/A EAHA (HG5)Centrifugal Impeller415v 50Hz7.5Kw1300 Litres Per Minute Maximum32 Metres Head MaximumMaximum suction 6 MetresApprox 15mm solids handling3" BSP Female Inlet & OutletH 405mm x W 280mm x L 650mm71.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plateB1½KQ/A-ST(HGM1-ST)Centrifugal Trash Impeller230v 50Hz0.75Kw270 Litres Per Minute Maximum12 Metres Head MaximumMaximum suction 6 MetresApprox 12mm solids handling1½" BSP Female Inlet & OutletH 285mm x W 185mm x L 375mm21KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HG2)Centrifugal Impeller415v 50Hz1.1Kw500 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 Degrees

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Mounted on a wheeled trolley. Complete with isolator, 5 meteres of power cable and 32 Amp 110v plug.Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.B2KQA 2757(HGM2)Mounted on Wheeled TrolleyComplete with Isolator5 Metres of Power Cable32 Amp PlugCentrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & Outlet25KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Mounted in tubular crash frame. Complete with isolator, 5 meteres of power cable and 32 Amp 110v plug.Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.B2KQA 2757(HGM2)Mounted in Crash FrameComplete with Isolator5 Metres of Power Cable32 Amp PlugCentrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & Outlet25KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plate.B2KQ/A-ST(HGM2-ST)Centrifugal Trash Impeller230v 50Hz1.5Kw440 Litres Per Minute Maximum15 Metres Head MaximumMaximum suction 6 MetresApprox 14mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 375mm24.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plate.B2KQ/A-STEAR4 (HG2T-ST)Centrifugal Trash Impeller415v 50Hz1.5Kw440 Litres Per Minute Maximum15 Metres Head MaximumMaximum suction 6 MetresApprox 14mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 375mm24.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plate.B3KQ/A-ST (HGM3-ST)Centrifugal Trash Impeller230v 50Hz2.2Kw775 Litres Per Minute Maximum15 Metres Head MaximumMaximum suction 6 MetresApprox 26mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm32KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plate.B3KQ/A-ST EAR6 (HG3T-ST)Centrifugal Trash Impeller415v 50Hz2.2Kw775 Litres Per Minute Maximum17 Metres Head MaximumMaximum suction 6 MetresApprox 26mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm32KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP B3XRA-ST EANH 3 BLADE SELF PRIMING pump 415V. GMP heavy duty cast iron self priming pumps. Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Trash duty and provided with an inspection door to remove any blockages that may occur. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Silicon carbide mechanical seal.Models 4Kw and above now supplied on a skid plate.B3XRA-ST EANHCentrifugal Trash Impeller415v 50Hz5.5Kw1370 Litres Per Minute Maximum24 Metres Head MaximumMaximum suction 6 MetresApprox 24mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm32KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water applications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.4" ports. 15kw. 2600res per min maximum, 30 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4XR/A EAFN(HG6)Centrifugal Impeller415/690v 50Hz15Kw2600 Litres Per Minute Maximum30 Metres Head MaximumMaximum suction 6 MetresApprox 25mm solids handling4" BSP Female Inlet & OutletH 455mm x W 365mm x L 800mm115KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. Suitable for pumping oil, paraffin. A non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

GMP Cast Iron Self Priming High Head Pump - 3" G3TMK-A EAHD 415v/690v. Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self-priming pump with open impeller suitable for pumping clean or slightly dirty water with no abrasives. a non-return valve is fitted on the inlet of the pump to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 mtrs and a maximum liquid temperature of 70 degrees C. stainless steel shaft, carbon mechanical seal.Models 4KW and above come assembled on a skid plate.

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal. EA7ECentrifugal Trash Impeller415v 50Hz1.5Kw440 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 16mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm23.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water, acidic, dilute acidapplications*Available Upon Request*

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal. EA7GCentrifugal Trash Impeller230v 50Hz1.5Kw440 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 16mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm23.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water, acidic, dilute acidapplications*Available Upon Request*

GMP EALE 4" Bronze self priming pump 415V.Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available.Carbon mechanical seal. High pressure/high volume versions are available PORT - 4" MAX SOLIDS - 35mm H x W x L - 405 x 315 x 670 LM/HM - 1650/12 kWNOT KEPT IN STOCK AVAILIABLE UPON REQUEST!!

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal.

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal.

GMP EAS8 2" Bronze self priming pump 230V.Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available

GMP EAS9 2" Bronze self priming pump 415V.Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available

GMP EAT1 3" Bronze self priming pump 230V.Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available

GMP EAT2 3" Bronze self priming pump 415V. Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate1½" ports. 415v 0.75kw. 300 litre per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. Overhead Protection fitted.B1½KQ/A (HG1)Centrifugal Impeller415v 50Hz0.75Kw250 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 Metres1½" BSP Female Inlet & Outlet6mm Maximum solids handlingH 285mm x W 185mm x L 375mm20KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 2.2kw. 950 litres per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3KQA 1226(HG3)Centrifugal Impeller415v 50Hz2.2Kw850 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm31.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.1½" ports. 0.75kw. 300 litre per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B1½KQ/A(HGM1)Centrifugal Impeller230v 50Hz0.75Kw250 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 6mm solids handling1½" BSP Female Inlet & OutletH 285mm x W 185mm x L 375mm20KgMaximum liquid temperature 60 Degrees20KgSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HGM2)Centrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HGM2)Centrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 2.2kw. 230v 50hz , 950 litres per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3KQA 1780(HGM3)Centrifugal Impeller230v 50Hz2.2Kw900 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm31.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with open impeller. Designed for dirty liquids up to 30mm. 2" Inlet / Outlet.Self Priming2" Inlet / Outlet110vCast IronStainless Wear Plate30mm Solids HandlingMax Suction 8mMax Delivery 450l/mMax Head 17mSupplier asB2KQA 2757 110v (HGM2)

Self priming electric pump with open impeller. Designed for dirty liquids up to 30mm. 2" Inlet / Outlet.Self Priming2" Inlet / Outlet230vCast IronStainless Wear Plate30mm Solids HandlingMax Suction 8mMax Delivery 450l/mMax Head 17mSupplier asB2KQA 2757 230v (HGM2)

PM 30 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM30Peripheral ring impeller230v 50Hz or 110v1.5Kw200 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction lift 6 Metres2" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 230mm x W 240mm x L 420mm27.6KgSuitable for juice, vinegar and diesel oil

PM 40 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM40Peripheral ring impeller230v 50Hz or 110v1.3Kw150 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction lift 6 Metres1½" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 180mm x W 230mm x L 360mm18.8KgSuitable for juice, vinegar and diesel oil

PM 50 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM50Peripheral ring impeller230v 50Hz or 110v1.5Kw200 Litres Per Minute Maximum25 Metres Head MaximumMaximum suction lift 6 Metres2" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 230mm x W 240mm x L 420mm27.6KgSuitable for juice, vinegar and diesel oil

PT 25 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415V 50HZReversing bronze body pump70 C max temp55 l/m max flow19m max head

PT 30 Reversing pump. All bronze construction for transfer of Juice, vinegar and diesel oil. Reversing switch enables the pump pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PT30Peripheral ring impeller230v 50Hz1.1Kw70 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction lift 6 Metres1¼" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 180mm x W 230mm x L 330mm13.2KgSuitable for juice, vinegar and diesel oil

PM 20 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415V 50HZ.Reversing bronze body pump.70 C max temp.100 l/m max flow.18m max head.

PT 50 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415v 50hz.Reversing bronze body pump.70 C max temp.200 l/m max flow.25m max head.

PT 70 Reversing pump. All brass construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Suction lift of 7metres Max liquid temp 70 degrees C Clean liquid only no solids 70mm 2.5" outlets 1.5 kw 2hp motor 415v 50hz reversing brass body pump 70 C max temp 360 l/m max flow 18m max head

Tellarini Series ECC Jet Stainless Steel Pump. Self Priming centrifugal jest pump. Pumps at a capacity of 10 to 60 l/min. Maximum pumping head 36m. Maximum suction at 8m. This pump is suitable for clean water at a temp of 45'cMaterials - Pump body and shaft = stainless steel AISI304 - Impeller/ Diffuser: Noryl - Seal : Ceramic/ Graphite/ NBR

Tellarini ENM ENT Brass Pump Units are self priming.They are fitted with an oversized single-phase asynchronous motor and long-lasting rotary switch, and they are designed for heavy duty applications.Thee pumps have a strong suction capacity, and can work even with a discontinuous presence of the liquid and the flow is reversible. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the suitability and choose appropriate gaskets.The product are particularly suitable for use:agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)professional use (continuous over time and heavy-duty applications, installation on systems)industry (installation on plant, machinery, machinery, production lines)Pump SpecificationsMaximum capacity : 28 lt/minMaximum head : 22 mGasket on the shaft: SealMaximum priming height : 6 mThreaded ports: 3/4"Maximum liquid density 1.1g/cm3 free of hard particles in suspensionMaximum temperature 90°CNot suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and firePossibility of reversing the pumping flowCoupling with impeller freeComplete with a pair of brass hose fittings for pipes 20 (one straight and one curved)Possibility of working for short periods with closed pipesDuring installation, the pump must be filled with liquid, subsequently this operation is no longer necessaryMaterials of ConstructionPump Parts: BrassCounter flange: AISI 304Shaft : AISI 316Impeller : BrassGaskets: NBRMotor SpecificationsPowered By A Motor Single-phase asynchronous 110V 50Hzequipped with mec motor 63 a 2800 g/min from 0.5 HP/ 0,4 KWService S1IP protection degree 44Insulation class FPower connection via cable end Cable with Schuko plug 2mSwitching on and reversing of the pumping flow through inverter switch

Pressed steel trolley to mount all PM and PT pumps onto to make them easy to transport over the site