GMP heavy duty cast iron self priming pumps.

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.

Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.

Models 4Kw and above now supplied on a skid plate.

1½" ports. 0.75kw. 300 litre per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.

• B1½KQ/A(HGM1)
• Centrifugal Impeller
• 230v 50Hz
• 0.75Kw
• 250 Litres Per Minute Maximum
• 16 Metres Head Maximum
• Maximum suction 6 Metres
• Approx 6mm solids handling
• 1½" BSP Female Inlet & Outlet
• H 285mm x W 185mm x L 375mm
• 20Kg
• Maximum liquid temperature 60 Degrees
• 20Kg
• Suitable for clean and dirty waterapplications