Air Driven Pumps

This air operated submersible pump, also known as a pneumatic submersible pump, is traditionally used in mining and construction industries for many applications, such as dewatering and sump drainage.Will pump down to 22 mmHandles solids up to 3 mmGovernor controlled motorCompact design enables use in restricted areas

Portable ARO / Ingersoll Rand extrusion system with a 2 ball, 4 ¼" Air Motor 9:1 ratio pump, follower plate and lifting assembly, fitted with PTFE Teflon internal elastomers. A fantastically versatile unit.ARO Piston Pump applications are ideal for viscous and high density fluid where materials are hard to move and dispense. These systems are widely used in garage for grease and lubrication dispensing to point at, around or nearby motor vehicles, but can be adapted to pump almost any given liquid out of a barrel!The pump can be accessorised with multiple follower plates for different usage of barrel size, and we have even been known to adapt the units for higher lift capabilities for larger barrels!These are a highly versatile unit and can make an employees life a lot more efficient when the pump can be taken to the job, instead of to-ing and fro-ing between work stations for multiple tasks!

Halfinch Ingersoll Rand / ARO aluminium diaphragm pump drum package with hytel diaphragms. Designed for 55 gallon barrel duties.FeaturesPerfect for removingyour chemical from any 55-gallon drum.ARO Drum Pumps are available in Aluminum, Stainless Steel or Polypropylene body materials!Stall-Free Operation- ARO Diaphragm Drum Pumps feature a patented "Unbalanced" air valve design that avoids stall-out, even under low air-inlet pressures.Bolted Construction- Unlike traditional band-clamp style pumps, ARO Diaphragm Drum Pumps utilize bolted fasteners for leak-tight integrity.Factory-Matched- ARO Drum Pump Package components (adapters, siphon tubes, etc.) contain pre-specified, matching materials of construction for complete fluid compatibility.Motor-Driven Drum Pumps; Type: Drum; GPM: 11.00; Motor Type: Air; Fluid Inlet Size: 1/2 NPTF; Fluid Outlet Size: 1/2 NPTF; Air Inlet Size: 1/4 NPTF

Motor-Driven Drum Pumps; Type: Drum; GPM: 11.00; Motor Type: Air; Fluid Inlet Size: 1/2 NPTF; Fluid Outlet Size: 1/2 NPTF; Air Inlet Size: 1/4 NPTF

Chicago Pneumatic CP 0010 Submersible Centrifugal PumpsFeatures & Benefits:Single-stage centrifugal units driven by powerful vane motorsDouble seals protect bearings and motor from water and mudIntegral oiler provides continuous lubricationIntegral strainer, air inlet valveBronze impellerCast-iron housingSpecifications:Part Number: T022224Net Weight: 33 Lbs.Water outlet: 50mmMin water depth: 22mmAir consumption: 47 l/sOverall diameter: 8.26" x 9"3 HP1" Air Inlet

COPPUS®Marine Ventilators,Steam-, Air- and Water Turbine-Drive VentilatorsCOPPUS marine ventilators are rugged, dependable cargo tank ventilators that have served the shipping industry for many years. They are ideal for on-board gas-freeing, drying and ventilation operations and are available in supply or exhaust models.Steam / Compressed Air Turbine Drive ModelsC-12A Supply: Delivers 5,350 cfm (9,090 m3/hr)C-12A Exhaust: Delivers 4,600 cfm (7,815 m3/hr)C-15A Supply: Delivers 8,400 cfm (14,275 m3/hr)C-15A Exhaust: Delivers 6,500 cfm (11,040 m3/hr)FeaturesCast iron turbine housing with aluminum coverBronze turbine wheel / stainless steel turbine blades / nozzlesSpark-resistant cast aluminum fan and fan housingStainless steel fasteners, studs and protective screen

Coppus model 3-HP Venturi 8" (203mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts).Operating PrincipleCompressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr)Induction ratios up to 40:1Multiple expansion nozzles machined into housingHigh static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP)No moving parts — virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all modelsAccepts flexible duct on diffuser end (optional duct adapter for inlet end available)Tripod for stationary mounting available

Coppus model 3S-HP Venturi 8" (203mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts). Operating Principle Compressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3S-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr) Induction ratios up to 40:1Multiple expansion nozzles machined into housing. High static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP) No moving parts — virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all models. Accepts flexible duct on diffuser end (optional duct adapter for inlet end available) Tripod for stationary mounting available

Coppus model 6-HP Air Operated Venturi (12" 305mm)High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts).Operating PrincipleCompressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3S-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr)Induction ratios up to 40:1Multiple expansion nozzles machined into housingHigh static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP)No moving parts — virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all modelsAccepts flexible duct on diffuser end (optional duct adapter for inlet end available)Tripod for stationary mounting available

Coppus model 8-HP Air Operated Venturi (14" 356mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts).Operating PrincipleCompressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3S-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr)Induction ratios up to 40:1Multiple expansion nozzles machined into housingHigh static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP)No moving parts — virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all modelsAccepts flexible duct on diffuser end (optional duct adapter for inlet end available)Tripod for stationary mounting available

Coppus Model 9-HP Air Operated Venturi (14" 356mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts).Operating PrincipleCompressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3S-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr)Induction ratios up to 40:1Multiple expansion nozzles machined into housingHigh static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP)No moving parts — virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all modelsAccepts flexible duct on diffuser end (optional duct adapter for inlet end available)Tripod for stationary mounting available

These fans are suited for hazardous situations and demanding ventilation projects due to their rugged, cast aluminum housing and fan blade. The RF design is based on action-reaction principles; compressed air is expelled via nozzles situated at the fan blade’s tip, resulting in exceptionally efficient, high-volume, low-maintenance air movers.2,100 to 5,100 cfm (3,566 to 8,665 m3/hr) at 80 psigFunctions as blower or exhausterLow compressed air consumptionSpark-resistant, cast-aluminum housing, and fan bladeVirtually maintenance-freePermanently lubricated bearings eliminate line oilerCast-in handles and feetCast-in bead to accept 12 inch (305 mm) and 16 inch (406 mm) ductBolt holes allow optional adapter plates attachment101-109 dBA @ 5 ft (1.5 m)

The VANO models offer a fixed guide vane design that delivers high volumes of air while maintaining static pressure for exhausting fumes and delivering fresh air. A rugged, durable, high-performance design makes the VANO models ideal for ventilating tanks, process vessels, tank cars, manholes and other confined spaces.Convertible Design:By removing the inlet sleeves, the VANO 175CV and 250CV convert to vertical exhaust units.With Inlet Sleeve Installed:The flexible duct can be attached to inlet and outlet ends. This allows fumes to be exhausted from a confined space, or fresh air to be delivered from a remote area.With Inlet Sleeve Removed:Cut-outs on inlet end of CV models are exposed for exhausting heavier-than-air fumes from the bottoms of tanks, vats, drums, and other confined spaces.FeaturesStraightening fixed guide vanes for improved static pressure performanceAccepts ducting at inlet and outlet endsConverts to exhaust fumes from bottom of tanksAvailable with totally enclosed (TE) or explosion proof (EP) motors and compatible switch; all models supplied with 15 ft power cordHeavy-gauge, powder-coated steel and cast aluminum constructionSpark-resistant fan bladesAutomatic thermal overload protection standard on VANO 175CV and 250CV models

The Hydra- Gate slurry mixing valve is a hydraulically operated diverter valve that is used to redirect the pump discharge flow back toward the area of the pump inlet to promote mixing of solids into a pumpable slurry. Once the solids are in suspension the valve is shifted to allow the mixture to be pumped to the desired location.Includes(1) Diverter Valve assy.(1) Control Valve assy.(1) Pair, 1/4" x 50 ft. Hydraulic Hose assy. (CV to DV)(1) Pair, 1/4" x 10 ft. Hydraulic Hose assy. (CV to HPU)Key Features
Attach directly to pump or place anywhere in the discharge line
Integral Flow Restrictor allows unit to be connected to any open center hydraulic power source
Optional Quick-Change Tee Adapter kit allows connection to any Hydra-Tech power unit without modification
Removable Access Cover for easy clean-out
Full Flow Design allows unresricted flow
Can be used with centrifugal pumps and electric sumbersibles with separate hydraulic power source
Safe Hydraulic Power operation
Use with any hydraulic submersible pump with flows to 1800 GPMSpecificationsWEIGHT: 40 lbs. (18kg)HEIGHT: 16-1/2" (420 mm)WIDTH (Overall): 11-1/4" (284 mm)LENGTH (Overall): 18" (455 mm)DISCHARGE PORTS: 6" NPTSOLIDS HANDLING: 5" (127mm)HYDRAULIC HOSE PORTS: 3/8" (-6) SAE(F)VALVE BODY: ASTM A36 SteelVALVE DISC: DelrinELASTOMERS: Buna NHYDRAULIC OIL: Mineral or Vegetable based oilsINPUT FLOW: Min. 1 GPM (4 LPM)OPERATING PRESSURE: Max. 3000 PSI (204 Bar)POWER SOURCE: Any Open Center Hydraulic System

Pneumatic CP 0020 Submersible Centrifugal Pumps.Our sump pumps are of the centrifugal type, pumping fluid by means of an air driven impeller. The pump should be immersed in the liquid to be pumped. The liquid will leave the pump through the outlet port. These pumps are designed for high performance and durability.This will pump down to within only (22 mm) from the base. They require no priming and can be run continuously, or even run dry, without overheating. They can be totally submerged, using a non-return valve on the exhaust pipe or an extended pipe ending above the level of the liquids.The pumps can be used in places where abuse and rough use are inevitable or acceptable in terms of increase in productivity. They are relatively small in size with a very large capacity and thus can be used in confined spaceFeatures & Benefits:Single-stage centrifugal units driven by powerful vane motorsDouble seals protect bearings and motor from water and mudIntegral oiler provides continuous lubricationIntegral strainer, air inlet valveBronze impellerCast-iron housingSpecifications:Part Number: T022185Net Weight: 57 Lbs.Water outlet: 62mmMin water depth: 51Air consumption: 51 l/sOverall diameter: 9" x 11.8"4 HPAir inlet 3/4"

SMA3 6AM1 SludgeMaster Pneumatic powered submersible pump. The SludgeMaster submersible, air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.Pipe Size: 3" / 80mm Displacement Per Stroke: - gal / - ltr Max. Flow per Minute: 300 gal / 1140 ltr Max. Solids Handling: 1.5" / 38mm Max. Discharge Pressure: - PSI / - BAR80 CFM max. air consumptionRequires 1/2in. dia. air hoseFits into a 14in. openingContinuous automatic lubricating oilerShip Weight59.0 lbsHP2 1/2Flow (GPH)18,000Max. Total Head (ft.)55Max.PS I80Suction TypeSteel strainerDischarge Port (in.)3 inchSelf-PrimingYesPump HousingAluminumVoluteAluminumImpeller Shaft416 SSTSealsFace-type mechanicalSolid Handling (in.)1 1/2Dimensions L x W x H (in.)23 1/2 x 13 x 13