Pneumatic CP 0020 Submersible Centrifugal Pumps.

Our sump pumps are of the centrifugal type, pumping fluid by means of an air driven impeller. The pump should be immersed in the liquid to be pumped. The liquid will leave the pump through the outlet port. These pumps are designed for high performance and durability.This will pump down to within only (22 mm) from the base. They require no priming and can be run continuously, or even run dry, without overheating. They can be totally submerged, using a non-return valve on the exhaust pipe or an extended pipe ending above the level of the liquids.The pumps can be used in places where abuse and rough use are inevitable or acceptable in terms of increase in productivity. They are relatively small in size with a very large capacity and thus can be used in confined space

Features & Benefits:

• Single-stage centrifugal units driven by powerful vane motors
• Double seals protect bearings and motor from water and mud
• Integral oiler provides continuous lubrication
• Integral strainer, air inlet valve
• Bronze impeller
• Cast-iron housing

Specifications:

• Part Number: T022185
• Net Weight: 57 Lbs.
• Water outlet: 62mm
• Min water depth: 51
• Air consumption: 51 l/s
• Overall diameter: 9" x 11.8"
• 4 HP
• Air inlet 3/4"