GMP Self Priming Centrifugal Pumps (HG)

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 5.5kw. 1100res per min maximum, 26 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4KQA EADM(HG4)Centrifugal Impeller415v 50Hz5.5Kw1100 Litres Per Minute Maximum26 Metres Head MaximumMaximum suction 6 MetresApprox 12mm solids handling3" BSP Female Inlet & OutletH 405mm x W 280mm x L 650mm65.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.4" ports. 4kw. 1650 litres per min maximum, 12 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4KQA EAFE(HG4A)Centrifugal Impeller415v 50Hz4Kw1650 Litres Per Minute Maximum12 Metres Head MaximumMaximum suction 6 MetresApprox 20mm solids handling4" BSP Female Inlet & OutletH 400mm x W 315mm x L 670mm64KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 7.5kw. 1300res per min maximum, 32 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3XR/A EAHA (HG5)Centrifugal Impeller415v 50Hz7.5Kw1300 Litres Per Minute Maximum32 Metres Head MaximumMaximum suction 6 MetresApprox 15mm solids handling3" BSP Female Inlet & OutletH 405mm x W 280mm x L 650mm71.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HG2)Centrifugal Impeller415v 50Hz1.1Kw500 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 Degrees

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Mounted on a wheeled trolley. Complete with isolator, 5 meteres of power cable and 32 Amp 110v plug.Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.B2KQA 2757(HGM2)Mounted on Wheeled TrolleyComplete with Isolator5 Metres of Power Cable32 Amp PlugCentrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & Outlet25KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Mounted in tubular crash frame. Complete with isolator, 5 meteres of power cable and 32 Amp 110v plug.Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.B2KQA 2757(HGM2)Mounted in Crash FrameComplete with Isolator5 Metres of Power Cable32 Amp PlugCentrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & Outlet25KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.4" ports. 15kw. 2600res per min maximum, 30 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B4XR/A EAFN(HG6)Centrifugal Impeller415/690v 50Hz15Kw2600 Litres Per Minute Maximum30 Metres Head MaximumMaximum suction 6 MetresApprox 25mm solids handling4" BSP Female Inlet & OutletH 455mm x W 365mm x L 800mm115KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate1½" ports. 415v 0.75kw. 300 litre per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. Overhead Protection fitted.B1½KQ/A (HG1)Centrifugal Impeller415v 50Hz0.75Kw250 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 Metres1½" BSP Female Inlet & Outlet6mm Maximum solids handlingH 285mm x W 185mm x L 375mm20KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 2.2kw. 950 litres per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3KQA 1226(HG3)Centrifugal Impeller415v 50Hz2.2Kw850 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm31.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

GMP heavy duty cast iron self priming pumps.Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.1½" ports. 0.75kw. 300 litre per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B1½KQ/A(HGM1)Centrifugal Impeller230v 50Hz0.75Kw250 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 6mm solids handling1½" BSP Female Inlet & OutletH 285mm x W 185mm x L 375mm20KgMaximum liquid temperature 60 Degrees20KgSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HGM2)Centrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.2" ports. 1.1kw. 400 litres per min maximum, 16 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B2KQA 2757(HGM2)Centrifugal Impeller230v 50Hz1.1Kw400 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction 6 MetresApprox 8mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm22KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications, flushing pipework

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.3" ports. 2.2kw. 230v 50hz , 950 litres per min maximum, 18 metres head maximum.Self priming electric pump with multi blade impeller, suitable for pumping clean or slightly dirty water. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. B3KQA 1780(HGM3)Centrifugal Impeller230v 50Hz2.2Kw900 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 10mm solids handling3" BSP Female Inlet & OutletH 300mm x W 185mm x L 445mm31.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty waterapplications

Self priming electric pump with open impeller. Designed for dirty liquids up to 30mm. 2" Inlet / Outlet.Self Priming2" Inlet / Outlet110vCast IronStainless Wear Plate30mm Solids HandlingMax Suction 8mMax Delivery 450l/mMax Head 17mSupplier asB2KQA 2757 110v (HGM2)

Self priming electric pump with open impeller. Designed for dirty liquids up to 30mm. 2" Inlet / Outlet.Self Priming2" Inlet / Outlet230vCast IronStainless Wear Plate30mm Solids HandlingMax Suction 8mMax Delivery 450l/mMax Head 17mSupplier asB2KQA 2757 230v (HGM2)