Pneumatic Submersible Pumps

The pump is capable of achieving a max flow of 833 LPM (50 m3/hr), a max head height of 91mand had a22kwmotor.

UV Water Sterilizer, Size 1/2 In, MNPT Connection, Flow 2 GPM, Max. Hardness Less Than 7 gpg, Max. Iron Less Than 0.3 ppm, Max. Manganese Less Than 0.05 ppm, Suspended Solids Less Than 10 ppm, Hydrogen Sulfide Less Than 0.05 ppm, Voltage 100-130, Lamp Watts 17, Max. Pressure 125 PSI, Temp. Range 36-104 F, Exposure 30 mJ /cmª, Length 18 1/2 In., Width 2 1/2 In., Height 2 1/2 In.

The HY range of dredging pumps will pump settled slurry, containing solids up to 125mm diameter, and concentration up to 70% by weight of the liquid. Standard submersible pumps can have a problem in handling solids which settle at the bottom of the sump or tank, and while all the liquid is pumped, the normal intake velocity is insufficient to pick up solids for pumping.On our Dredging Pumps, a heavy-duty agitator below the impeller disturbs the solids, creating a slurry which is easily pumped, and at the same time keeps the pump inlet port clear of potentally blocking solids.ApplicationsTank clean-outRiver, lake, marina, canal clean-outMining and Pipe laying (trenches)Waste collection pitsFeaturesChromium cast constructionSeries of lipseals35 - 120mm solids handling25 - 295kW output100 - 350mm dischargeA HY Dredging Pump was used in the decommissioning of some works in Kent. Previously 12m diameter x 12m deep tanks, deep filled with silt from a cement plant were emptied by a contractor taking in excess 3 months, however after the installation of a HY8/5C, the tanks took just days to clear and the client was delighted with the results.For further information, accurate pump selection, technical details and cost, please contact our Sales Team.

The Hydra- Gate slurry mixing valve is a hydraulically operated diverter valve that is used to redirect the pump discharge flow back toward the area of the pump inlet to promote mixing of solids into a pumpable slurry. Once the solids are in suspension the valve is shifted to allow the mixture to be pumped to the desired location.Includes(1) Diverter Valve assy.(1) Control Valve assy.(1) Pair, 1/4" x 50 ft. Hydraulic Hose assy. (CV to DV)(1) Pair, 1/4" x 10 ft. Hydraulic Hose assy. (CV to HPU)Key Features
Attach directly to pump or place anywhere in the discharge line
Integral Flow Restrictor allows unit to be connected to any open center hydraulic power source
Optional Quick-Change Tee Adapter kit allows connection to any Hydra-Tech power unit without modification
Removable Access Cover for easy clean-out
Full Flow Design allows unresricted flow
Can be used with centrifugal pumps and electric sumbersibles with separate hydraulic power source
Safe Hydraulic Power operation
Use with any hydraulic submersible pump with flows to 1800 GPMSpecificationsWEIGHT: 40 lbs. (18kg)HEIGHT: 16-1/2" (420 mm)WIDTH (Overall): 11-1/4" (284 mm)LENGTH (Overall): 18" (455 mm)DISCHARGE PORTS: 6" NPTSOLIDS HANDLING: 5" (127mm)HYDRAULIC HOSE PORTS: 3/8" (-6) SAE(F)VALVE BODY: ASTM A36 SteelVALVE DISC: DelrinELASTOMERS: Buna NHYDRAULIC OIL: Mineral or Vegetable based oilsINPUT FLOW: Min. 1 GPM (4 LPM)OPERATING PRESSURE: Max. 3000 PSI (204 Bar)POWER SOURCE: Any Open Center Hydraulic System

The Tsurumi range of dredging pumps will pump settled slurry, containing solids up to 125mm diameter, and concentration up to 70% by weight of the liquid.Standard submersible pumps can have a problem in handling solidsthat settle in the bottom ofthesump or tank, and whilst all of the liquid is pumped, the normal intake velocity is insufficient to pick up solids for pumping.On these dredging pumps, a heavy-duty agitator below the impeller disturbs the solids, creating a slurry, which is easily pumped, and at the same time keeps the pump inlet port clear of potentially blocking solids.Please contact one of our Sales Advisors for accurate pump selection, technical details and cost.APPLICATIONSTank clean-outRiver, lake, marina, canal clean-outMining and pipe laying (trenches)Waste collection pitsFEATURESChromium cast constructionSeries of lipseals20-120mm solids handling5.5kW output100-300mm discharge

The Tsurumi range of dredging pumps will pump settled slurry, containing solids up to 125mm diameter, and concentration up to 70% by weight of the liquid.Standard submersible pumps can have a problem in handling solidsthat settle in the bottom ofthesump or tank, and whilst all of the liquid is pumped, the normal intake velocity is insufficient to pick up solids for pumping.On these dredging pumps, a heavy-duty agitator below the impeller disturbs the solids, creating a slurry, which is easily pumped, and at the same time keeps the pump inlet port clear of potentially blocking solids.Please contact one of our Sales Advisors for accurate pump selection, technical details and cost.APPLICATIONSTank clean-outRiver, lake, marina, canal clean-outMining and pipe laying (trenches)Waste collection pitsFEATURESChromium cast constructionSeries of lipseals20-120mm solids handling3.7-110kW output100-300mm discharge

SMA3 6AM1 SludgeMaster Pneumatic powered submersible pump. The SludgeMaster submersible, air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.Pipe Size: 3" / 80mm Displacement Per Stroke: - gal / - ltr Max. Flow per Minute: 300 gal / 1140 ltr Max. Solids Handling: 1.5" / 38mm Max. Discharge Pressure: - PSI / - BAR80 CFM max. air consumptionRequires 1/2in. dia. air hoseFits into a 14in. openingContinuous automatic lubricating oilerShip Weight59.0 lbsHP2 1/2Flow (GPH)18,000Max. Total Head (ft.)55Max.PS I80Suction TypeSteel strainerDischarge Port (in.)3 inchSelf-PrimingYesPump HousingAluminumVoluteAluminumImpeller Shaft416 SSTSealsFace-type mechanicalSolid Handling (in.)1 1/2Dimensions L x W x H (in.)23 1/2 x 13 x 13