JST22SK submersible sewage cutter pumps. Available as standard as free standing or can be guide rail mounted.

Can be used on 3" SR80 Guide Rail 020-504. By using Code JST7538R adapter 3-4 inch the JST37SK can be used on 4" Guide Rail 020-506

Single channel tungsten carbide tipped impeller running against a grinding diffuser plate causing the shredding action cutting soft solids into smaller parts to pump through the body to waste.

Cast iron pump body, volute stand, impeller, lower motor bearing/seal housing and motor top cover. Stainless steel shaft and motor case. Twin mechanical seals, carbon ceramic and silicon carbide.

Black water and sewage pumping with soft solids in suspension.

Will cut and pass soft solids through the impeller to discharge pipe.

Impeller incorporating a tungsten carbide cutting tip on a single vane impeller, running against a grinding diffuser plate causing the shredding action.

Single pump tungsten carbide tipped impeller capable of cutting soft solids into smaller parts to pump through the body to waste. Cast iron pump body, volute stand, impeller, lower motor bearing/seal housing and motor top cover.Stainless steel shaft and motor casing. Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber. Complete with 10 metres of power cable. Hose tails are supplied with all models.

• JST22SK
• Single Channel Cutter Impeller
• Manual - No Float
• 415v Three Phase
• 2.2Kw
• 1000 Litres Per Minute Maximum
• 20 Metres Head Maximum
• 3" BSP Female Outlet c/w Hose tail Connection
• H 565mm x W 240mm x L 405mm
• Complete with 10 Metres of Power Cable
• Suitable for sewage waste drainage applications