Fuel Transfer Pumps Electric

The Red EANS is a three phase 415v 3" outlet High volume self priming diesel fuel & light oil pump. Heavy duty cast iron body with oil resistant seals and gaskets Max flow 900 l/m and a max head of 22 metres 4.0KW motor.Self priming electric pump with open impeller to transfer fuels. Suitable for pumping diesel, gas, oil, parrafin. NOT FOR PUMPING PETROL. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degress C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Viton mechanical seal and Viton check valve.The EANS is a 3" outletHigh volume self priming diesel fuel & light oil pump.Heavy duty cast iron body with oil resistant seals and gasketsMax flow 900 l/m and a max head of 22 metres2.2kw motorSelf priming to 6 metres

Tellarini ENM ENT Brass Pump Units are self priming.They are fitted with an oversized single-phase asynchronous motor and long-lasting rotary switch, and they are designed for heavy duty applications.Thee pumps have a strong suction capacity, and can work even with a discontinuous presence of the liquid and the flow is reversible. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the suitability and choose appropriate gaskets.The product are particularly suitable for use:agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)professional use (continuous over time and heavy-duty applications, installation on systems)industry (installation on plant, machinery, machinery, production lines)Pump SpecificationsMaximum capacity : 28 lt/minMaximum head : 22 mGasket on the shaft: SealMaximum priming height : 6 mThreaded ports: 3/4"Maximum liquid density 1.1g/cm3 free of hard particles in suspensionMaximum temperature 90°CNot suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and firePossibility of reversing the pumping flowCoupling with impeller freeComplete with a pair of brass hose fittings for pipes 20 (one straight and one curved)Possibility of working for short periods with closed pipesDuring installation, the pump must be filled with liquid, subsequently this operation is no longer necessaryMaterials of ConstructionPump Parts: BrassCounter flange: AISI 304Shaft : AISI 316Impeller : BrassGaskets: NBRMotor SpecificationsPowered By A Motor Single-phase asynchronous 110V 50Hzequipped with mec motor 63 a 2800 g/min from 0.5 HP/ 0,4 KWService S1IP protection degree 44Insulation class FPower connection via cable end Cable with Schuko plug 2mSwitching on and reversing of the pumping flow through inverter switch