Fuel Oil Transfer Pumps

Volumetric electric pump with eccentric rotor to transfer low flow diesel fuel and oil, consisting of a self-ventilated single-phase motor fitted with thermal protection inserted in the winding. The acetal resin rotor is placed within the aluminium pump body, ensuring a reliable performance with oils up to 700 cSt.Flow rate is dependant on the oil thickness and can be as much as 30 litres per min. 2 metres suction height.Complete with internal by pass, suction filter, on/off switch and 2 metres of power cable.¾" bsp outlet, supplied with ¾" - 1" hose barbs.Care should be taken when pumping thicker oil as the run time of the motor decreases to 30 mins maximum

CDI-H27 pumps are a five chamber positive displacement diaphragm pump with a built in bypass within the pump body.Maximum suction lift 2 metres. All models have on/off switches. Designed for pumping AD Blue (AUS32-DEF-ADBLUE) with no solid suspended particles, fibres or abrasive materials.NOT for pumping petrol.Low voltage models have a duty cycle of approx 20 minutes in every hour. Complete with 1.5 metres of power cable and UK plug on the 230v model.Battery clamps for low voltage models.IP54. 1" hose tails / 1" - ¾ hose tails supplied.

CDI-H27 pumps are a five chamber positive displacement diaphragm pump with a built in bypass within the pump body.Maximum suction lift 2 metres. All models have on/off switches. Designed for pumping AD Blue (AUS32-DEF-ADBLUE) with no solid suspended particles, fibres or abrasive materials.NOT for pumping petrol.Low voltage models have a duty cycle of approx 20 minutes in every hour. Complete with 1.5 metres of power cable and UK plug on the 230v model.Battery clamps for low voltage models.IP54. 1" hose tails / 1" - ¾ hose tails supplied.

CDI-H27 pumps are a five chamber positive displacement diaphragm pump with a built in bypass within the pump body.Maximum suction lift 2 metres. All models have on/off switches. Designed for pumping AD Blue (AUS32-DEF-ADBLUE) with no solid suspended particles, fibres or abrasive materials.NOT for pumping petrol.Low voltage models have a duty cycle of approx 20 minutes in every hour. Complete with 1.5 metres of power cable and UK plug on the 230v model.Battery clamps for low voltage models.IP54. 1" hose tails / 1" - ¾ hose tails supplied.

The Delta 40-30M is a small 230v self priming pump for the transfer of diesel oil and other light hydrocarbons. 3/4" inlet and outlet 40 l/m max flow and 30m max head.Self priming to 5m if used with footvalve.This pump comes complete with a handle .. switch and lead. Delta PGA 40-30Available in 230v or 110v 50Hz550 Watt¾" Inlet and Outlet40 Litres Per Minute Maximum30 Metres Maximum HeadSelf priming to 5 metres if used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbonsComplete with carrying handle, switch and 1.5 metres of power cable

The Delta 40-30M is a small 110v self priming pump for the transfer of diesel oil and other light hydrocarbons. 3/4" inlet and outlet 40 l/m max flow and 30m max head.Self priming to 5m if used with footvalve.This pump comes complete with a handle .. switch and lead. Delta PGA 40-30Available in 230v or 110v 50Hz550 Watt¾" Inlet and Outlet40 Litres Per Minute Maximum30 Metres Maximum HeadSelf priming to 5 metres if used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbonsComplete with carrying handle, switch and 1.5 metres of power cable

The HE100 is a small 1" vane pump with fitted bypass for diesel and light fuel oils.. The sliding vanes give the pump a fantastic priming ability and good flow.

The PGA 40-30M is a small self priming pump for the transfer of diesel oil and other light hydrocarbons. 3/4" inlet and outlet 40 l/m max flow and 30m max head.Self priming to 8m if used with foot valve. PGA 40-30Available in 230v or 415v 50Hz550 Watt¾" Inlet and Outlet40 Litres Per Minute Maximum30 Metres Maximum HeadSelf priming to 5 metresif used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbons

The PGA 40-30T is a small self priming pump for the transfer of diesel oil and other light hydrocarbons. 3/4" inlet and outlet 40 l/m max flow and 30m max head.Self priming to 8m if used with foot valve. PGA 40-30Available in 230v or 415v 50Hz550 Watt¾" Inlet and Outlet40 Litres Per Minute Maximum30 Metres Maximum HeadSelf priming to 5 metresif used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbons

The PGA 60-40M is a small self priming pump for the transfer of diesel oil and other light hydrocarbons. 1" inlet and outlet 60l/m max flow and 40m max head.Self priming to 8m if used with foot valve. PGA 60-40Available in 230v or 415v 50Hz900 Watt1" Inlet and Outlet60 Litres Per Minute Maximum40 Metres Maximum HeadSelf priming to 5 metres if used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbons

The PGA 60-40T is a small self priming pump for the transfer of diesel oil and other light hydrocarbons. 1" inlet and outlet 60l/m max flow and 40m max head.Self priming to 8m if used with foot valve. PGA 60-40Available in 230v or 415v 50Hz900 Watt1" Inlet and Outlet60 Litres Per Minute Maximum40 Metres Maximum HeadSelf priming to 5 metres if used with footvalveSmall self priming pump for the transfer of diesel oil and other light hydrocarbons

PM 30 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM30Peripheral ring impeller230v 50Hz or 110v1.5Kw200 Litres Per Minute Maximum16 Metres Head MaximumMaximum suction lift 6 Metres2" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 230mm x W 240mm x L 420mm27.6KgSuitable for juice, vinegar and diesel oil

PM 40 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM40Peripheral ring impeller230v 50Hz or 110v1.3Kw150 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction lift 6 Metres1½" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 180mm x W 230mm x L 360mm18.8KgSuitable for juice, vinegar and diesel oil

PM 50 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PM50Peripheral ring impeller230v 50Hz or 110v1.5Kw200 Litres Per Minute Maximum25 Metres Head MaximumMaximum suction lift 6 Metres2" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 230mm x W 240mm x L 420mm27.6KgSuitable for juice, vinegar and diesel oil

PT 25 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415V 50HZReversing bronze body pump70 C max temp55 l/m max flow19m max head

PT 30 Reversing pump. All bronze construction for transfer of Juice, vinegar and diesel oil. Reversing switch enables the pump pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.PT30Peripheral ring impeller230v 50Hz1.1Kw70 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction lift 6 Metres1¼" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 180mm x W 230mm x L 330mm13.2KgSuitable for juice, vinegar and diesel oil

PM 20 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump to pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415V 50HZ.Reversing bronze body pump.70 C max temp.100 l/m max flow.18m max head.

PT 50 Reversing pump. All bronze construction for transfer of Juice , vinegar and diesel oil. Reversing switch enables the pump pump out and refill without moving the hoses. Pump body, impeller, cover and nipples made of brass. stainless steel shaft. Six metres max suction depth. Clean liquids only, no solids or abrasives. Inlet and outlets are food grade treads not BSP.415v 50hz.Reversing bronze body pump.70 C max temp.200 l/m max flow.25m max head.

Tellarini ENM ENT Brass Pump Units are self priming.They are fitted with an oversized single-phase asynchronous motor and long-lasting rotary switch, and they are designed for heavy duty applications.Thee pumps have a strong suction capacity, and can work even with a discontinuous presence of the liquid and the flow is reversible. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the suitability and choose appropriate gaskets.The product are particularly suitable for use:agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)professional use (continuous over time and heavy-duty applications, installation on systems)industry (installation on plant, machinery, machinery, production lines)Pump SpecificationsMaximum capacity : 28 lt/minMaximum head : 22 mGasket on the shaft: SealMaximum priming height : 6 mThreaded ports: 3/4"Maximum liquid density 1.1g/cm3 free of hard particles in suspensionMaximum temperature 90°CNot suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and firePossibility of reversing the pumping flowCoupling with impeller freeComplete with a pair of brass hose fittings for pipes 20 (one straight and one curved)Possibility of working for short periods with closed pipesDuring installation, the pump must be filled with liquid, subsequently this operation is no longer necessaryMaterials of ConstructionPump Parts: BrassCounter flange: AISI 304Shaft : AISI 316Impeller : BrassGaskets: NBRMotor SpecificationsPowered By A Motor Single-phase asynchronous 110V 50Hzequipped with mec motor 63 a 2800 g/min from 0.5 HP/ 0,4 KWService S1IP protection degree 44Insulation class FPower connection via cable end Cable with Schuko plug 2mSwitching on and reversing of the pumping flow through inverter switch