The 230v Presscontrol is a electronic pressure switch and protection device.

Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.

The 110v Presscontrol is a electronic pressure switch and protection device.

Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.

Suitable for most water systems from well, tank or low pressure mains.

Anotherversion called the controlpress is available for pumps with larger motors to be installed.

• Presscontrol
• 110 Volt
• 1.5Kw Maximum
• 8 Amp Maximum
• 1" Male BSP Inlet/Outlet
• 1.4Kg
• Automatically turns on and off a pump