• For Installation directly on the pipeline
• Set Pressure 1.0-7.5 bar
• 230v
• 2.2Kw
• 8 Amp
• Max Over Pressure 12 bar
• LCD Display

Hydrocontroller have been specifically developed to manage electric pumps both single phase (with permanent capacitor) and three phase. Special attention has been addressed to the User Interface to allow a quick and easy installation. On the front of the device there are 4 buttons and 16 characters 2 line display for managing functioning and alarm parameters. Through the messages displayed there is no need to consult the manual to locate and interpret the parameters. the parameters for the operation are the desired pressure and maximum current of the pump. In the event of an abnormal situation Hydrocontroller protects the pump by switching off, but in order to safeguard the water supply it will undertake repeated automatic or programmed reset attempts. This advanced model has the features to allow groups of up to 8 pumps (all pumps must be identical). In the multi-pumps mode, each pump is controlled and regulated by a Hydrocontroller. In this configuration, the system handles all the pumps used in variable speed, increasing/decreasing together their sped of rotation, in order to keep the pressure constant as the flow rate varies. The alternation of the pumps is guaranteed and, in case of failure of a component the system automatically reconfigures itself. Hydrocontroller wet version has 1 1/4" female threads on the inlet and outlet.