Basic Control Panels

Guardian ME3.0-7.5Kw10-20 Amp415vGuardians give dry run protection without probes in the wellReplaces the standard control box and monitors power factorCan be wired to pressure switches etcGuardian 2E provides dry run protection without the need for probes in the wellThe control box replaces the standard control box and monitors motor power factor to detect dry running or blocked conditions.If the panel detects a rise or fall in power factor, it cuts power to the motor, it will then allow a cool off period of20, 45, & 90 minute intervals to see if water level has recovered - if not it turns the power off to protect the motor.Replaces existing control box and can be wired to pressure switches

For Installation directly on the pipelineSet Pressure 1.0-7.5 bar230v2.2Kw10 AmpMax Over Pressure 12 barLCD DisplayHydrocontroller have been specifically developed to manage electric pumps both single phase (with permanent capacitor) and three phase. Special attention has been addressed to the User Interface to allow a quick and easy installation. On the front of the device there are 4 buttons and 16 characters 2 line display for managing functioning and alarm parameters. Through the messages displayed there is no need to consult the manual to locate and interpret the parameters. the parameters for the operation are the desired pressure and maximum current of the pump. In the event of an abnormal situation Hydrocontroller protects the pump by switching off, but in order to safeguard the water supply it will undertake repeated automatic or programmed reset attempts. This advanced model has the features to allow groups of up to 8 pumps (all pumps must be identical). In the multi-pumps mode, each pump is controlled and regulated by a Hydrocontroller. In this configuration, the system handles all the pumps used in variable speed, increasing/decreasing together their sped of rotation, in order to keep the pressure constant as the flow rate varies. The alternation of the pumps is guaranteed and, in case of failure of a component the system automatically reconfigures itself. Hydrocontroller wet version has 1 1/4" female threads on the inlet and outlet.

For Installation directly on the pipelineSet Pressure 1.0-7.5 bar230v2.2Kw8 AmpMax Over Pressure 12 barLCD DisplayHydrocontroller have been specifically developed to manage electric pumps both single phase (with permanent capacitor) and three phase. Special attention has been addressed to the User Interface to allow a quick and easy installation. On the front of the device there are 4 buttons and 16 characters 2 line display for managing functioning and alarm parameters. Through the messages displayed there is no need to consult the manual to locate and interpret the parameters. the parameters for the operation are the desired pressure and maximum current of the pump. In the event of an abnormal situation Hydrocontroller protects the pump by switching off, but in order to safeguard the water supply it will undertake repeated automatic or programmed reset attempts. This advanced model has the features to allow groups of up to 8 pumps (all pumps must be identical). In the multi-pumps mode, each pump is controlled and regulated by a Hydrocontroller. In this configuration, the system handles all the pumps used in variable speed, increasing/decreasing together their sped of rotation, in order to keep the pressure constant as the flow rate varies. The alternation of the pumps is guaranteed and, in case of failure of a component the system automatically reconfigures itself. Hydrocontroller wet version has 1 1/4" female threads on the inlet and outlet.

Kiosk Single Door High Impact ployethylene Green Body H)1000mm W)700mm D)450mm Door 900mm x 550mm Interior Backing Board 800mmx500mm Polycarbonate Lock Image shown in green but other colours can be made, just phone and ask.

The Backlit LCD Displays the running current (amperage) and the power factor (PF) and allows the user to set the values for protection of the pumps.The unit will cut power to the pump if the Maximum amperage is reached (user defined)or if the power factor (PF) drops below the set limit (user defined)This protects against the pump running in overload and also running out of water (Dry run).Pilot is an electronic device for the control of single phase and three phase motors (pumps), which provides protection against;Dry Running.Over current.Power loss.Excessive starts (per hour).COM-N.O-N.C contacts for use with external alarm.2X NO/NC digital inputs.Automatically attempts to restart up to 5 times, after which if problems persist will stop until manually reset.

The Backlit LCD Displays the running current (amperage) and the power factor (PF) and allows the user to set the values for protection of the pumps.The unit will cut power to the pump if the Maximum amperage is reached (user defined)or if the power factor (PF) drops below the set limit (user defined)This protects against the pump running in overload and also running out of water (Dry run).Pilot is an electronic device for the control of single phase and three phase motors (pumps), which provides protection against;Dry Running.Over current.Power loss.Excessive starts (per hour).COM-N.O-N.C contacts for use with external alarm.2X NO/NC digital inputs.Automatically attempts to restart up to 5 times, after which if problems persist will stop until manually reset.

The Backlit LCD Displays the running current (amperage) and the power factor (PF) and allows the user to set the values for protection of the pumps.The unit will cut power to the pump if the Maximum amperage is reached (user defined)or if the power factor (PF) drops below the set limit (user defined)This protects against the pump running in overload and also running out of water (Dry run)

The Backlit LCD Displays the running current (amperage) and the power factor (PF) and allows the user to set the values for protection of the pumps.The unit will cut power to the pump if the Maximum amperage is reached (user defined)or if the power factor (PF) drops below the set limit (user defined)This protects against the pump running in overload and also running out of water (Dry run)

The Backlit LCD Displays the running current (amperage) and the power factor (PF) and allows the user to set the values for protection of the pumps.The unit will cut power to the pump if the Maximum amperage is reached (user defined)or if the power factor (PF) drops below the set limit (user defined)This protects against the pump running in overload and also running out of water (Dry run)

Simplex Duplex UP M/3 Basic Twin Pump Control Panel 400v.Simplex control panels for one pump control of sump pumps, booster pumps or borehole pump. Operation by floats, pressure switches or level probes.Duplex control panels for two pump control of sump pumps or booster pumps. Operation by floats or pressure switches.Both have provision for klixon connections and a 12 Volt DC Alarm control circuit. Plastic ABS boxes and IP55 Rated.Optional Extra's - High Level Alarm Equipment -12 Volt AC/DC 22mm Panel Sounder / Continuous lit lamp IP20 - Code 200-002Flashing Beacon Sounder 12/24v DC - Code309-5922

Simplex Duplex UP T/10 Basic Twin Pump Control Panel 400v.Simplex Duplex control panels for one pump control of sump pumps, booster pumps or borehole pump. Operation by floats, pressure switches or level probes.Duplex control panels for two pump control of sump pumps or booster pumps. Operation by floats or pressure switches.Both have provision for klixon connections and a 12 Volt DC Alarm control circuit. Plastic ABS boxes and IP55 Rated.Optional Extra's - High Level Alarm Equipment -12 Volt AC/DC 22mm Panel Sounder / Continuous lit lamp IP20 - Code 200-002Flashing Beacon Sounder 12/24v DC - Code309-5922

These IP50 enclosure control panels offer single pump control with manual (non latching) and automatic operation with overload protection. Pumps with external capacitors can be fitted within the enclosures. These can be used for single or twn float operation, pressure switch operation and/or probe operation. Two way operation of either emptying or filling. Please take a look at our range of float switches also found our site.QA/50B 110vSingle pump control panelHxWxL 220 x 255 x 130 mmVoltage 100vAmp Range 2-18Kw Range 0.37-2.2Ask us about other sizes and types

These IP50 enclosure control panels offer single pump control with manual (non latching) and automatic operation with overload protection. Pumps with external capacitors can be fitted within the enclosures. These can be used for single or twn float operation, pressure switch operation and/or probe operation. Two way operation of either emptying or filling. Please take a look at our range of float switches also found our site.QA/50BSingle pump control panelHxWxL 220 x 255 x 130 mmVoltage 230vAmp Range 2-18Kw Range 0.37-2.2Ask us about other sizes and types

Simplex UP T/10 Basic Single Pump Control Panel 400v.These IP50 enclosure control panels offer single pump control with manual (non latching) and automatic operation with overload protection. Pumps with external capacitors can be fitted within the enclosures. These can be used for single or twn float operation, pressure switch operation and/or probe operation. Two way operation of either emptying or filling. Please take a look at our range of float switches also found our site.QA/50B 400vSingle pump control panelHxWxL 220 x 255 x 130 mmVoltage 400vAmp Range 2-18Kw Range 0.37-2.2Ask us about other sizes and types

Simplex UP T/15 Basic Single Pump Control Panel 400v.Simplex control panels for one pump control of sump pumps, booster pumps or borehole pump. Operation by floats, pressure switches or level probes.Duplex control panels for two pump control of sump pumps or booster pumps. Operation by floats or pressure switches.Both have provision for klixon connections and a 12 Volt DC Alarm control circuit. Plastic ABS boxes and IP55 Rated.Optional Extra's - High Level Alarm Equipment -12 Volt AC/DC 22mm Panel Sounder / Continuous lit lamp IP20 - Code 200-002Flashing Beacon Sounder 12/24v DC - Code309-5922

Utility Panel 15-13-13 AmpPerfect for use with Puddle SensorFor use with all residue pumps, PXL, RSD400 etc