The accumulator vessel is a device that fitted into a pressurised water system will provide system water at a pre-set sustained pressure. Its most common application is to supply systems in which the main supply pressure is too low and a pump is fitted to boost the pressure to an acceptable level. As system demands take place the accumulator vessel will sustain system pressure by feeding additional water into the system at the required pressure. This process will limit the number of times the pump needs to start (pump hunting) in order that system pressure remains at the optimal level.

Models available -

Vertical 2 - 500Litre Mild Steel 10 Bar Max, 8 Bar Working 99 Degrees Max.

Horizontal 25-300 Litre Mild Steel 10 Bar Max, 8 Bar Working 99 Degrees Max.

Vertical 24-500 Litre Mild Steel 16 Bar Max 99 Degrees Max.

Vertical 2-60 LitreStainless Steel 10 Bar Max 99 Degrees Max.

Horizontal 60 Litre Stainless Steel 10 Bar Max.

• Elbi
• AC8
• 8 Litre
• EPDM Membrane - Suitable for potable water
• No Mount
• Main Connection ¾"
• Aux Connection - No
• 8 Bar Working
• 10 Bar Max
• L 315mm x D 204mm
• 2.3Kg