Surface Mounted Pumps

GF-150CentrifugalImpeller230v 50Hz1.1Kw500 Litres Per Minute Maximum5 Metres Head MaximumSee PDF for dimensionsSuitable for cleanwaterdrainage applications

This powerful pump will transfer high viscosity oils (up to 800cst)with ease. It is a handy and compact pump provided with a carrying handle, so that it can be transported to on-site applications easily.The noise, generated during operation, is kept at an extremely low level.It is provided with a by-pass valve to protect the motor.The pump's main use will be as an oil change pump for various types of oils.

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal. EA7ECentrifugal Trash Impeller415v 50Hz1.5Kw440 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 16mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm23.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water, acidic, dilute acidapplications*Available Upon Request*

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal. EA7GCentrifugal Trash Impeller230v 50Hz1.5Kw440 Litres Per Minute Maximum18 Metres Head MaximumMaximum suction 6 MetresApprox 16mm solids handling2" BSP Female Inlet & OutletH 300mm x W 185mm x L 410mm23.5KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water, acidic, dilute acidapplications*Available Upon Request*

GMP EALE 4" Bronze self priming pump 415V.Self priming electric pump in bronze with open impeller that allows the passage of large solids. Suitable for pumping sea water and the circulation of swimming pools. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller are made from bronze. Stainless steel shaft. Carbon mechanical seal. High pressure/high volume versions are available.Carbon mechanical seal. High pressure/high volume versions are available PORT - 4" MAX SOLIDS - 35mm H x W x L - 405 x 315 x 670 LM/HM - 1650/12 kWNOT KEPT IN STOCK AVAILIABLE UPON REQUEST!!

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal.

Self priming electric pump suitable for pumping acidic waters, sewage, transferring dilute acid, pumping fruit juice or fluid food stuff. This version is provided with an inspection door to remove any blockages that may occur. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metros and a maximum liquid temperature of 70°C. Pump casing, inlet flange and impeller and shaft are made from stainless steel. Silicon carbide seal.

Self priming electric pump with multi blade impeller, suitable for pumping clean and dirty water, acidic, dilute acid applications. Not suitable for pumping abbrasives. A non return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.Maximum suction depth of 6 metres and a maximum liquid temperature of 60°c. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal.Models 4Kw and above now supplied on a skid plate.EALTCentrifugal Trash Impeller415v 50Hz4Kw750 Litres Per Minute Maximum25 Metres Head MaximumMaximum suction 6 MetresApprox 19mm solids handling3" BSP Female Inlet & OutletH 400mm x W 280mm x L 635mm82KgMaximum liquid temperature 60 DegreesSuitable for clean and dirty water, acidic, dilute acidapplications*Available Upon Request*