Submersible Water Pumps

RST75 4" Stainless Steel Submersible Fountain Pump 415v. RST75 pumps are designed for continuous duty applications and site drainage, clean and dirty water and water features are examples. Top Outlet, twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber.Stainless steel outer case, shaft and motor case. Cast iron lower motor bearing/seal housing, motor top cover and volute. Complete with 10 metres of power cable and hose tail.RST75CentrifugalManual - No Float415v 50Hz Three Phase7.5Kw2200 Litres Per Minute Maximum30 Metres Head Maximum4" Male BSP Outlet - No Hose Tail Connection SuppliedSuitable for water features, drainage applications clean and dirty water

The compac range are for clean water, designed to drain domestic applications. Ideal for limited spaces. Complete with integral float switch, which can be selected in automatic or manual mode. In automatic mode the pump switches on when water level reaches approx 140mm and switches off at approx 30mm. In manual the level of water can be pumped down to approx 3mm. Supplied with check valve and a 1 1/4" adjustable hose connector for hose sizes 3/4", 1", and 1 1/4" and 10 metres of power cable. Pump body made from polypropylene, noryl impeller, stainless steel shaft. Twin NBR lip seal.300w 230v motor 140 l/m max flow7 m max head Polypropylene Body 1.1/4" outlet Automatic operation 416 stainless steel shaft max water temp 40 degrees c

The compac range are for clean water, designed to drain domestic applications. Ideal for limited spaces. Complete with integral float switch, which can be selected in automatic or manual mode. In automatic mode the pump switches on when water level reaches approx 140mm and switches off at approx 30mm. In manual the level of water can be pumped down to approx 3mm. Supplied with check valve and a 1 1/4" adjustable hose connector for hose sizes 3/4", 1", and 1 1/4" and 10 metres of power cable. Pump body made from polypropylene, noryl impeller, stainless steel shaft. Twin NBR lip seal.300w 110v motor 130 l/m max flow7 m max head Polypropylene Body 1.1/4" outlet Automatic operation 416 stainless steel shaft max water temp 40 degrees c

The compac range are for clean water, designed to drain domestic applications. Ideal for limited spaces. Complete with integral float switch, which can be selected in automatic or manual mode. In automatic mode the pump switches on when water level reaches approx 140mm and switches off at approx 30mm. In manual the level of water can be pumped down to approx 3mm. Supplied with check valve and a 1 1/4" adjustable hose connector for hose sizes 3/4", 1", and 1 1/4" and 10 metres of power cable. Pump body made from polypropylene, noryl impeller, stainless steel shaft. Twin NBR lip seal.300w 230v motor 190 l/m max flow10 m max head Polypropylene Body 1.1/4" outlet Automatic operation 416 stainless steel shaft max water temp 40 degrees c

The DRB range of small drainage pumps is ideal for heavy-duty use. These pumps are constructed in B-10 Bronze, and incorporate heavy-duty bearings and a silicon-carbide, mechanical shaft seal.APPLICATIONSSea water and BrineMarineFood processingDomestic and Industrial useChemicalsSewage and treatment worksFEATURESBronze constructionDouble mechanical seal within oil bath10x20mm solids handling0.37-1.5kW output32-50mm dischargeAutomatic version available upon request* The same pump range is available in cast-iron (DRO Range), cast-iron with an explosion proof motor (DRF Range) and stainless steel (DRX Range).

J530 Well Buddy Automatic Submersible Pump 110v. The Well Buddy is ready to be used in traditional wells, installation in home for pressurisation, small scale irrigation systems, water deposits, water harvesting and collection tanks out of the box.This pump is suitable for pumping clear water, with no suspended solids or abrasive materials. The maximum submersion depth is 7m.The Well Buddy is made out of Stainless Steel and cast iron parts. The Automatic version is Equipped with a float switch.The Well Buddy's high delivery volume (143 l/min) combined with a high delivery head (45m) makes the pump suitable for a variety of irrigation applications.

J530 Well Buddy Automatic Submersible Pump 230v. The Well Buddy is ready to be used in traditional wells, installation in home for pressurisation, small scale irrigation systems, water deposits, water harvesting and collection tanks out of the box.This pump is suitable for pumping clear water, with no suspended solids or abrasive materials. The maximum submersion depth is 7m.The Well Buddy is made out of Stainless Steel and cast iron parts. The Automatic version is Equipped with a float switch.The Well Buddy's high delivery volume (143 l/min) combined with a high delivery head (45m) makes the pump suitable for a variety of irrigation applications.

J530 Well Buddy Manual Submersible Pump 230v. The Well Buddy is ready to be used in traditional wells, installation in home for pressurisation, small scale irrigation systems, water deposits, water harvesting and collection tanks out of the box.This pump is suitable for pumping clear water, with no suspended solids or abrasive materials. The maximum submersion depth is 7m.The Well Buddy is made tout of Stainless Steel and cast iron parts. The Automatic version is Equipped with a float switch.The Well Buddy's high delivery volume (143 l/min) combined with a high delivery head (45m) makes the pump suitable for a variety of irrigation applications.