Diesel Contractors Site Pumps

This is a 2" electric start diesel powered trash water pump, designed to withstand the challenges of unrefined and dirty water. Built with a tougher pump than the clean water pumps in the pumpsdirect2u pump range, particles and debris up to 35mm can be pumped easily without risk of causing damage to the internal components.Powered by a robust and reliable 296cc diesel engine and equipped with 2” (80mm) inlet and outlets, this capable of pumping 600L/min, and has a max head height of 25 mtrs. This fantastic pumping performance makes this the perfect diesel trash water pump for even the most demanding of jobs. The advantage of being powered by diesel rather than electric is the ability to take this machine away from locations that are powered by the National Grid, allowing you to pump wherever the job at hand requires.Weighing only 52kg is a lightweight machine and easily transported from one location to another. The open frame that the main unit is housed in also helps with the portability as it doubles up as a handle for the user to hold on to. The compact design means that this machine can easily be stored in a van, shed, workshop, garage.All diesel water pumps come with a 1 year domestic warranty.A powerful diesel trash water pump which can deal with dirty and unrefined water.Capable of pumping debris up to 35mm in diameter.Powered by a 296cc diesel engine.Pumps up to 600L/min.25 mtr head.

This 3" Diesel-Driven Water Pump is a surface-mounted pump with a powerful 8.7hp engine inside a robust carry frame, volute housing, and low oil shutdown to help prevent damage.Electric-starting 8.7hp diesel engineSurface-mounted diesel-driven pump1000ltr/min maximum water flow rateLow oil shutdown helps prevent damageSuper durable rugged cast iron impellerHeavy-duty volute housing for strength26m pumping head / 6m suction head3" suction outlet diameter size

2'' (50mm) Cast iron heavy duty industrial self priming diesel transfer pump powered by 4.8 HP Yanmar diesel engine.Recoil/pull start.Viton seals.680 LPM max free flow.30 meter head max.3600 RPM max.

The JT-6 6" inch x 6 inch Pump is powered by a Beinei engine model: F4L912T,48kw@1800rpm, air cooler,4-cylinderCompressor.The JT range are heavy duty compressor or vacuum prime contractor pumpsfor utility use, flood protection, overpumping and well pointing. QSmodels come equipped in an acoustic canopy with noise levels reduced to61db.Solids handling capacity of 76mm.INLET: 150MMOUTLET: 150MMCAPACITY: 330Mm3/hrHEAD: 34MTRSSUCTION LIFT: 7.6MTRSSOLID HANDLING: 76.2MMIMPELLER: OPEN TYPEAll stainless steel internal pump parts.Oil Bath Mech seal system.Electric start with hour run meter.71 Db Noise level.55 hour run fuel tank.Fully Bunded.Cooper Fuel filters.Electric start with hour run metertelescopic rear support legs

AMT 5586-H6/D6 6" Diesel Engine Driven Trash Pump-Skid.AMT 5586-H6/D6 6 Diesel Engine Driven Trash Pump on Skid, Diesel, 1000 GPM, Silic on Carbide/Viton Mechanical Seal and Buna-N O-rings and Check Valve. The AMT 6 Engine Driven Trash Pump is designed for applications requiring high volume flow and solid/debris handling capabilities. Pump is constructed of heavy duty sand cast aluminum with cast iron and stainless steel internal parts for wear resistance and durability. Patented built-in slide mechanism features nylon and powder coated steel components that permit servicing, repairing and cleaning entire pump without removing hoses or pump components from trailer. Digital tachometer/hour meter installed. Requires 12 Volt Battery: BCI Group 24, Minimum of 500 CCA (Cold Crank Amps) Battery Box Cables Setup for Automotive Post Type Connection. Cast Aluminum with Cast Iron and Stainless Steel Components for Long Lasting Durability; Built-in Check Valve for Fast Priming to 20 Feet; Maximum Solids Handling 3.BRAND AMTLENGTH INCHES 71WIDTH INCHES 33HEIGHT INCHES 40DISCHARGE CONNECTION SIZE INCHES 6DISCHARGE HEAD FEET 97INLET CONNECTION INCHES 6CONSTRUCTION Cast AluminumHOUSING CONSTRUCTION Cast AluminumSHAFT CONSTRUCTION Stainless SteelHOUSING MATERIAL Cast AluminumIMPELLER MATERIAL Stainless SteelPSI 42TEMPERATURE OF LIQUID PUMPED 180 FHORSEPOWER 23FUEL TANK CAPACITY GALLONS 20GALLONS PER HOUR 60,000GALLONS PER MINUTE 1,000MAX GPH 60,000MAXIMUM FLOW 1,000RUN TIME HOURS 12SEALS Viton/Sic MechanicalSUCTION/DRAW HEAD FEET 20DISCHARGE CONNECTION TYPE MNPTINLET CONNECTION TYPE MNPTMOTOR TYPE TEFCTYPE Self-Priming TrashENGINE Liquid CooledIMPELLER Stainless Steel, Semi-Open, Solids HandlingPUMP Skid Mounted Self-Priming Trash CentrifugalPACKAGE QUANTITY 1LIMITED WARRANTY YEARS 1LIMITED WARRANTY MONTHS 12MANUFACTURERS PART NUMBER 5586-Y6MAX. TEMPERATURE 180MAXIMUM HEAD HEIGHT 97HARDWARE Stainless SteelDRIVER TYPE Diesel EngineVALVE TYPE Check ValveCURVE NUMBER ASELF-PRIMING YesCHECK VALVE YesMAXIMUM LPM 3785UNIT NOW OBSELETE, REPLACED WITHAMT 5586-H6/D6

AMT 4S13XZR, Self-Priming Trash Pump With Hatz Diesel 1B50 Engine, 13 HP, 4" NPT (Suction and Discharge), 530 GPM or 2,006 LPM, 33mtr Head, Cast Aluminum, Viton Seal, Oil Alert Included.This portable and heavy duty centrifugal trash pump self-primes to 20 feet lift after initially filling casing with liquid. It includes easy cleanout with replaceable cast iron impeller and volute that resists abrasion/wear. This model features aluminum housing, cast iron wearparts, built-in check valve, suction strainer and heavy duty steel roll frame. It is also equipped with precision lapped mechanical seal to reduce the likelihood of leakage, and a clog resistant impeller capable of handling solids up to 2" diameter. Heavy duty cast iron flanges with male NPT threads that rotates in 90° increments. Easy access fill plug on discharge port. This unit is used to handle water containing stones, sticks, mud and other solids (up to 25% by volume).FeaturesCast aluminum with internal cast iron wearparts for durabilityCast iron impellerSilicon Carbide mechanical seal with graphite impregnated seat and Viton elastomersHeavy duty steel roll frame and strainer includedEPDM/EPR O-rings standard with optional VitonBuilt-in check valve4" removable male NPT suction and discharge portsDischarge rotates in 90° incrementsHatz Diesel 1B40 engineVibration dampening feetMaximum temperature 180°FMaximum solids handling up to 2" diameterSelf-primes to 20 ft12V DC electric start (battery not included—use BCI group: U1 or U2)Wheel kit optionalW 656mm x L 498mm x H524mm

Model Belon DPH50/E, Engine Model 178F, Output Power 6HP, Displacement (cc) 296, Oil Capacity (L)1.1, Inlet Size 50mm, Head of Delivery 70mtrs, Suction 7mtrs, Flow 30m³hr, Fuel Tank Capacity (3.5L, Size(mm) 560*450*560N.W/G. W(KG) 58/688

Specifications Belon Power 3inch high pressure water pump 192F diesel engine cast iron pump 90 meter head deliveryModel DPH80LE Iron DPH80LE DPH100/80LEEngine Model 188FB192FA192FAOutput Power (HP) 121313, Displacement (cc) 456499499, Oil Capacity (L) 1.651.651.65, Inlet Size mm (in) 80/3"80/3" 100 (in)/ 80(out), Head of Delivery (90m), Suction (8m), Flow 700LPM, Fuel Tank Capacity (L)141414, Size (mm) 640*470*710640*470*710640*470*710N.W/G.W (KG)899396

DE-80XD YR is a 3" self priming diesel engine driven water pump. Featuring aluminiumpump body, cast iron impeller and volute. Suitable for pumping clean and black water. Powered by a Yanmar L48V diesel engine. Housed within a protective tubular carry frame. Complete with hose couplings, clips and strainer.

Diesel Powered 2" Recoil Start Diaphragm Pump KDD-2R (190 LPM).Quiet and reliable recoil start Honda over head valve engine with a low oil sensor. Straight Line flow design is self cleaning - eliminates clogging. Pump hosing made of lightweight sand cast aluminum, standard wheel kit provides portability. Built to run dry without damage, perfect for areas with low seepage. anew narrow design allows access through doorways and easier storage.KDD-2REngine - RECOIL Start Hatz 1B20 5.0hpInlet/Outlet - 2"Kg 91W x L x H mm - 670 x 430 x 1200Max l/min - 190Man Head/m - 17

Diesel Powered 3" RECOIL Start Diaphragm Pump KDD-3R (330 LPM).Quiet and reliable recoil start Honda over head valve engine with a low oil sensor. Straight Line flow design is self cleaning - eliminates clogging. Pump hosing made of lightweight sand cast aluminum, standard wheel kit provides portability. Built to run dry without damage, perfect for areas with low seepage. anew narrow design allows access through doorways and easier storage.KDD-3REngine - Recoil Start Hatz 1B20 5.0hpInlet/Outlet - 3"Kg 60W x L x H mm - 700 x 1200 x 670Max l/min - 330Man Head/m - 17

Gorman-Rupp’s Unit 608 Tankleenor provides quick, efficient and economical cleaning of petroleum storage tanks.The Unit 608 Tankleenor is a lightweight, wheel-mounted cleaning system designed for oneman operation and is easily moved from job to job.Even when tanks are thought to be free of moisture and foreign debris, they often containenough water and other contaminants to degrade the stored product. The Gorman-Rupp Unit 608 Tankleenor can remove contaminants…like gel precipitates, microbial growths, rustand water…without disturbing the product or taking the tank out of service.Operating liquid drawn from the contaminant tank circulates through the pump and creates avacuum at the eductor. The vacuum draws moisture and contaminants through the cleanouthose and back to the eductor, where it mixes with the operating liquid and is carried to the contaminant tank.THE GORMAN-RUPP UNIT 608 Tankleenor comes complete with...PumpAt the heart of this system is a Gorman-Rupp O Series self-priming centrifugal pump. This system offers the same quality and designfeatures that have proved to be so successful in bulk plants, in fuel oiland aviation fuel delivery service. O Series 2" x 2" (50mm x 50mm) self-priming centrifugal pump with standard Viton seal (optional Buna seal available), close-coupled to a 1 HP Class 1, Group D,60 Hz, 115/230V, single phaseexplosion-proofTEFC electric motor with 50' (15m) of 12 gauge, type SO cable with 125 volt, 20 amp grounded plug.The pump is equipped with a venturi-type eductor permitting recirculation of operating fluid without contaminating the tank, and a hand-operated valve for back flushing. The discharge and suctionports are fitted with quick-connect couplers.A Reel AssemblyDetachable reel assembly for storing hose and controlling directionand travel rate comes standard. The reel assembly is fitted with abuilt-in sight tube which enables the operator to locate and removepockets of contamination.A Hose Assembly*Hydrocarbon-resistant hose,5⁄8" diameter by 42' long (16mm x 13m),comes standard with a spring steel integral strap insert and a specially designed nozzle.Connector HoseA 6' x3⁄4" (2m x 19mm) connector hose is provided to connect pumpeductor and valve to reel assembly.Suction and discharge hosesHoses come in 11⁄2" x 15' lengths, fitted with quick-disconnectcouplers to mate up with pump suction and discharge couplers.Adjustable Guide TubeAdjustable 7'-131⁄2' (14m) long stainless steel guide tube, withspring-loaded foot, comes standard.Ground wireWire is 10' (3m) long, with clip, for grounding unit.Optional 50 Hz MotorFor 50 Hz operation, Unit 608-A Tankleenor is available with 1.1kW(11⁄2HP), Class 1, Group D explosion-proof, 50 Hz, 115/220V, singlephase TEFC electric motor.

The Hilta Dysite D5 is a 3" diesel diaphragm spate pump, available with a 24hour running tank. Also available in a 24hr version.KEY FEATURES3" outletsTwo wheel site chassis for easier manoeuvrabilityAlso available with a 24hr running tankCompact design making it easier to transportDiesel engine with electric startHigh solids handling and delivery head suitable for solids & muddy water'Snore' allows run dry without causing damage to the pump end

Koshin/Hatz 2" Diesel Powered Electric Start Diaphragm Pump KDD-2E ( 190 LPM).Quiet and reliable recoil start Honda over head valve engine with a low oil sensor. Straight Line flow design is self cleaning - eliminates clogging. Pump hosing made of lightweight sand cast aluminum, standard wheel kit provides portability. Built to run dry without damage, perfect for areas with low seepage. anew narrow design allows access through doorways and easier storage.KDD-2EEngine - Electric Start Hatz 1B20 5.0hpInlet/Outlet - 2"Kg 91W x L x H mm - 700 x 420 x 540Max l/min - 190Man Head/m - 17

Koshin/Hatz 3" Diesel Powered Electric Start Diaphragm Pump KDD-3E (330 LPM).Quiet and reliable recoil start Honda over head valve engine with a low oil sensor. Straight Line flow design is self cleaning - eliminates clogging. Pump hosing made of lightweight sand cast aluminum, standard wheel kit provides portability. Built to run dry without damage, perfect for areas with low seepage. anew narrow design allows access through doorways and easier storage.KDD-3EEngine - Electric Start Diesel Hatz 1B20 5.0hpInlet/Outlet - 3"Kg 60W x L x H mm - 700 x 420 x 540Max l/min - 330Man Head/m - 17

PD75 Portable Diesel Spate Pump. STONE CATCHER NOT INCLUDED. THIS IS AN ADDITIONAL ITEM.Double diaphragm suction pumpThe Spate PD 75 double diaphragm pump is an extremely versatile pump suitable for a wide variety of applications.The pump is ideal for operation in oil spills, de- watering, construction, industry, tank cleaning and other general pumping duties.The double diaphragm design creates a powerful suction and lift ability. These same diaphragms have a gentle pumping action that does not emulsify oil and water. This allows rapid gravity separation following pumping.The speed and output of the hydraulically driven model is infinitely variable. It can be supplied with a hydraulic power unit. Both models are delivered fitted with oil resistant regulators. Simplicity of design and construction provide for total ease of maintenance. This extremely rugged pump has been used worldwide for various oil recovery applications.Gross Weight: 100kg.Diaphragm Pump with S20ne excluded stone Catcher MK2.STONE CATCHER NOT INCLUDED. THIS IS AN ADDITIONAL ITEM.Model: SPATE PD75,Manufacture Foilex;Max. capacity 31,8 m3/h (140 USgpm)Max. solids Ø6 mm (0,23 inMax. suction lift 9,1 m (30 ft)Max. discharge head 30,5 m (100 ft)Air handling capacity 3,77 l/s (8 ft3/min)Branch size 75 mm (3 in)Maximum pump speed 2000 rpm;Power requirement 2,2 kW (2,9 bhp)Suction connection Cuffed on,Ø3" camlock quick couplingfemaleDischarge connection Cuffed on,Ø3" camlock quick coupling,male

PD75 Portable Electric Spate Pump automatic self priming induced flow, diaphragm pump, fitted with standard sealsand oil tolerant pressure regulators,powered by a 3.0kW 415/3/50 IE3 4 pole IP55 electric motor, mounted on a static chassis with anti-vibration. STONE CATCHER NOT INCLUDED. THIS US AN ADDITIONAL ITEM.Electric Double diaphragm suction pumpThe Spate PD 75 double diaphragm pump is an extremely versatile pump suitable for a wide variety of applications.The pump is ideal for operation in oil spills, de- watering, construction, industry, tank cleaning and other general pumping duties.The double diaphragm design creates a powerful suction and lift ability. These same diaphragms have a gentle pumping action that does not emulsify oil and water. This allows rapid gravity separation following pumping.The speed and output of the hydraulically driven model is infinitely variable. Both models are delivered fitted with oil resistant regulators. Simplicity of design and construction provide for total ease of maintenance. This extremely rugged pump has been used worldwide for various oil recovery applications.Gross Weight: 100kg.Diaphragm Pump without Stone Catcher MK2.STONE CATCHER NOT INCLUDED. THIS IS AN ADDITIONAL ITEM.Model: SPATE PD75,Motor: 3KW/400/50Emmission: IE3Manufacture Foilex;Max. capacity 31,8 m3/h (140 USgpm)Max. solids Ø6 mm (0,23 inMax. suction lift 9,1 m (30 ft)Max. discharge head 30,5 m (100 ft)Air handling capacity 3,77 l/s (8 ft3/min)Branch size 75 mm (3 in)Maximum pump speed 1500 rpm;Power requirement 2,2 kW (2,9 bhp)Suction connection Cuffed on,Ø3" camlock quick couplingfemaleDischarge connection Cuffed on,Ø3" camlock quick coupling,male

The 3" PTD Diesel Centrifugal Pump is a heavy duty low maintenance pump ideal for applications such as mining and exploration where diesel fuel is preferred over petrol.Subaru has built this model with a 4.8hp EY20D Subaru diesel engine and pump together as one high quality unit.FeaturesSelf priming pump requires no water for subsequent pumping operation (once intial pump is primed)Efficient, economical operation is assured by directly coupled pump. It provides compactness and guarantees that power is not lost.Corrosion resistant qualities are prominent by adopting a mechanical seal and impellers of special cast iron.Heavy cast iron volute guarantees low maintenance.Easy StartHigh Power & PerformanceGreat reliability & DurabilityLong lifeQuiet running, with low noise rust resistant mufflersEasy maintenanceComes with Engine Tool Kit (1 Set), Strainer (1pc.), Hose coupling (2pcs), Hose Band (3 pcs)2yr Pump warranty3yr EY20D Subaru engine warrantyApplicationsGeneral purpose de-wateringAnywhere heavy duty portable pumps are neededIndustryMiningConstruction Job SiteRentalAgricultural

The is a heavy duty self-priming pump powered by a Japanese manufactured Robin DY27D-2D diesel engine. All units are equipped with carbon ceramic mechanical seals and light weight aluminium pump housings to assist with portability. For increased abrasion resistance, it has cast iron volute and impellor. These materials ensure maximum durability for the pumping of clear and black water as found on building sites. All models are housed within protective tubular steel, easy carry frame, and anti-vibration rubber feet. Hose couplings, washers, clips and strainers are supplied as standard.EngineEngine type:dieselEngine model:Robin DY 27-2DPower:5 liters.with.PerformanceApplication:for clean waterFraction size:8 mmProductivity:1300 l / minDiameter of pipe:100 mmHead height:27 mAbsorption depth:8.0 mDimensionsSize:680 × 410 × 590 mm

Product DetailsTheWP60 L100(6″ inch Inlet/Outlet) is the ultimate model for ultra high volume pumping applications. Able to efficiently pump3000 litres a minutewith an impressive head pressure of22 meters (31psi max pressure). Thisdiesel water pumpis suitable for simple on-site or off-site de-watering or fluid transfer jobs. TheWP60 L100diesel water pump comes complete withviton elastomersthroughout and a high end qualitysilicon carbide mechanical sealsthat are compatible for pumping diesel. The Impeller and Volute are made of a heavy duty cast iron, giving this pump a long life of pumping!TheWP60 L100is definitely a quality backed product, recommended by many industries in the area of commercial, marine, mining, drilling, and industrial.This unit comes standard with a Electric Start, Galvanised Frame and Resilient MountsCovered by Yanmar L Series 2 year warranty and Pumps Australia’s 1 year pump warranty.Extremely High Output,Transfer Pump6″ Suction and Discharge Ports3000 lpm Discharge CapacityHead 31 psi maxSilicon Carbide Mechanical Seals – MSViton ElastomersSelf-primingCompatible for Diesel Fuel PumpingCast Iron Impeller & VoluteYanmar L100Diesel EngineComes with 2-year engine warranty

PUMP TYPE Trash pump / Self-priming pump.Yanmar 3 inch full trash pumpL70N diesel engineModel YDP30TNEElectric and recoil startBattery and leads not included3 inch BSP(M) portsSelf-priming to 7 m (23 ft)Solids handling to 30 mm (1.2 inches)27 m (88 ft) head1150 lpm (304 gpm)Yanmar LN series diesel engine operators manualYanmar diesel engineModel L70NPerformance:4.4 kW (6.0 hp) @ 3600 rpm continuous4.9 kW (6.7 hp) @ 3600 rpm rated4.1 kW (5.5 hp) @ 3000 rpm continuous4.5 kW (6.1 hp) @ 3000 rpm ratedCapacities:3.3 litre fuel tank1.05 litre crankcase oil capacityRecommended engine oil:SAE 10W30 diesel engine oilFuel consumption:1.15 litres per hour @ 3000 rpm (75% load)Aprox 2.8 hours run time per 3.3 litre fuel tankAprox 39 hours run time per 45 litre fuel tank

PUMP TYPE Trash pump / Self-priming pump.ENGINE TYPE4-stroke, air-cooled diesel engine.Yanmar diesel 4 inch full trash pumpModel YDP40TN-EL100N 10 hp dieselElectric and recoil startBattery and leads not includedSelf-priming to 7 m (23 ft)1750 lpm (463 gpm)25 m head (36 psi)Yanmar LN series diesel engine operators manualYanmar diesel engineModel L100NPerformance:6.6 kW (9 hp) @ 3600 rpm continuous7.4 kW (10 hp) @ 3600 rpm rated5.7 kW (7.7 hp) @ 3000 rpm continuous6.5 kW (8.8 hp) @ 3000 rpm ratedCapacities:5.4 litre fuel tank1.6 litre crankcase oil capacityRecommended engine oil:SAE 10W30 diesel engine oilFuel consumption:1.65 litres per hour @ 3000 rpm (75% load)Aprox 3.3 hours run time per 5.4 litre fuel tankAprox 27 hours run time per 45 litre fuel tank

Yanmar diesel YDP30TN-3E 3 inch BSP(M) full trash pumpYanmar L70N diesel engineElectric and recoil startBattery and leads not included3 inch BSP(M) portsPerformance:27 m (88 ft) head1150 lpm (304 gpm)Self-priming to 7 m (23 ft)Solids handling to 30 mm (1.2 inches)

Yanmar YDP30STN Recoil Start Air cooled Diesel Semi-Trash PumpFeatures:Higher performace over standard fresh water pumps, unique to YanmarHandles gravel and trash below ⌀20mmEasy mantenance; just remove 4 bolts to clean the inside of the casingSic ceramic machanical seal can be used semi-permanentlySpecifications:Pump type: Semi-trash pump / Self-priming pumpSuc. & discharge diameter: 80mmMax total head: 23mSuction lift: 7mMax capacity: 850L/minEngine model: L48NEEngine type: 4-stroke, air-cooled diesel engineEngine displacement: 219ccMax engine output: 3.5kW / 3600rpmContinuous engine output: 3.1kW / 3600rpmStarting system: RecoilFuel oil tank capacity: 2.4LDimensions (L x W x H): 515mm x 430mm x 490mmDry weight: 40kg