Control panels

Mascontrol isa electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol12 Volt0.18Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4Kg

Mascontrol is a electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol24 Volt0.37Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4KgH 165mm x W 210mm x L 250mm

For connection with Borehole motor. On/off switch and resetable overload.

For connection with Borehole motor. On/off switch and resetable overload.

For connection with Borehole motor. On/off switch and resetable overload.

For connection with Borehole motor. On/off switch and resetable overload.

For connection with Borehole motor. On/off switch and resetable overload.

For connection with Borehole motor. On/off switch and resetable overload.