Domestic Booster Single Pumps Sets

Puramatic booster pump. 1" ports. Self priming pump for potable water. 0.6kw 230v motor. Fully automatic operation As taps open the pump turns on and supplys water from low pressure main or stored water supply. Self priming from 7m with footvalve 1" inlet & Outlets 0.6kw 230v 50Hz fully automatic 2lt vessel fitted self priming to 7m 40l/m max flow 38m max head

Sanso automatic pump PAZ-4031AR.Totally enclosed fan-cooled outdoor motorEndurance and reliability against salty and humid environment has improvedSelections of outlet opening out of 3 directionsVariable pressure switchAnti-freezing heaterLight weight of motor (Aluminium is used for motor)Resin-made outdoor cover (Main body can be protected from water, dust, etc.)Protection relay against run-dryInstallation charges are not included.

The Boostamatic 6000 is a brass ended pump with a peripheral design. WRAS CompliantDesigned to provide a pressurised water supply from a break tank.Each unit is fitted with a control module which combines both flow and pressure switch activation making it a completely automatically operatedpump.Ideal for pressurisation of hot or cold water services in commercial applications, these units are easy to use and install.Key SpecificationsMaximum Bar Pressure 4.2Maximum Head (m) 42Maximum Flow (lpm) 34Motor (kw) 0.37Noise RatingInlet / Outlet Connections1" / 1"Power Supply 230/1/50Maximum Water Temperature 65°CConstruction Brass / plasticPump DimensionsL x W x H (mm)232 x 132 x 292

Superinox 1000/24 Booster Pump 230v. Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested,protecting it from excessive wear and enabling users to save power.These booster sets are supplied ready to be installed and used. Do not allow to run dry.Superinox 60/50 & 90/50 ue the Jet self priming pumps. Stainless steel pump body, impeller/diffuser/venturi made from technopolymer. Clean water only with a maximum liquid temperature off 50 degrees.Superinox 1000/24Automatic Pressure Set25 Litre Pressure Vessel - Stainless SteelCentrifugal Impeller230v 50Hz0.8Kw55 Litres Per Minute Maximum45 Metres Head Maximum7 Metres suction Head Maximum1" BSP Female Inlet &1" BSP Female OutletH 550mm x W 280mm x L 530mm11KgForcold pressure boosting.Switches on and off automatically when an outlet is opened closed

Superinox 2000/24 Booster Pump 230v. Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested,protecting it from excessive wear and enabling users to save power.These booster sets are supplied ready to be installed and used. Do not allow to run dry.Superinox 60/50 & 90/50 ue the Jet self priming pumps. Stainless steel pump body, impeller/diffuser/venturi made from technopolymer. Clean water only with a maximum liquid temperature off 50 degrees.Superinox 2000/24Automatic Pressure Set25 Litre Pressure Vessel - Stainless SteelCentrifugal Impeller230v 50Hz0.8Kw55 Litres Per Minute Maximum45 Metres Head Maximum7 Metres suction Head Maximum1" BSP Female Inlet &1" BSP Female OutletH 550mm x W 280mm x L 530mm11KgForcold pressure boosting.Switches on and off automatically when an outlet is opened closed

APM203is a small compact variable speed booster set and is small and completely integrated.APM203 uses the most up to date technology and user friendly to create constant pressure according to the system demands and thus an optimization of energy consumption.For use in domestic systems, gardening and small industrial applicationsOPERATING RANGE:flow rate up to 80l/min, head up to 50m (5.0 Bar)PUMPED LIQUID:clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized and not chemically neutralLIQUID TEMPERATURE RANGE:from 0°C to + 60°CNOT Self Priming, needs to flooded suction