12v & 24v Pumps

Sanicubic 1 Single Heavy Duty Macerator PumpConnections - Toilet, Basin, Bathtub, Dishwasher, Kitchen Sink, Shower,Washing Machine & BidetDischarges - 11m Vertical / 110m HorizontalSANICUBIC 1 is a single pump heavy duty macerator suitable for up to two toilets and multiple other waste water producing appliances.Pumps up to 11 metres vertically and 100 metres horizontally50mm discharge pipeworkWorking waste water temperature 35 degrees CInlet diameter 110mm for black waste and 40mm for grey wasteSeparate isolating valves required but not suppliedIncludes visual alarmDimensions (Height x Width x Depth) -539 x 426 x 440Discharge Pipe Diameter (mm) - 50Electrical Supply (V) -220-240 / 50Horsepower - 32Max. Amperage (A) -40/50/100/110Maximum Temperature (°C) - 70Min. Gravity Fall on Horizontal Run - 3Motor Speed (RPM) - 2800

SPERONI PM 50 Bronze Self Priming Pump 2.5Hp 220V 1Phase 60Hz NPT.BRONZE Two Way Self Priming Transfer Pump— 3600GPH, 2.5HP, 2in. Ports – PM50 SPERONI.ApplicationThese bronze water pumps find their application in the transfer of salt water, clear water, oil and diesel and mixtures of liquids with these compounds. For the correct functioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid impurities. The special self-priming system allows priming up to 8 meters depth. The electric motor is fitted with a reverser which allows the pump to rotate in two directions. The bidirectional rotation obtained through the reverser makes transfer operations easier since the suction side can be used for delivery and the delivery side for suction.Operating ConditionsLiquid temperature up to 95°F (for home use according to EN 60335-2-41)Temperature max. liquid: 140°F (for other uses)Ambient temperature up to 104°FTotal suction lift up to 26 ft.MotorSingle-phase 220V – 60HzTwo-Pole induction motor (n = 3450 min-1)Insulation Class FProtection IP 44MaterialsPump body: BronzeMotor Support: Cast IronImpeller: BrassConnectors: BrassShaft with rotor: Stainless Steel AISI 304Double oil sealTechnical Specifications

Tsurumi BZ Submersible pumps are Non-clog impeller allows large diameter of foreign matter with respect to discharge bore. This ensures that waste water and sewage are efficiently transferred. The impeller comes out with the motor when the motor is removed from the pump casing (a back-pull-out design, upto 3,7kW).Delivery rate: 66m³/h – Pressure sidge: JIS4" – Delivery altitude: 13.5m – Power consumption: 2,2kW – Weight: 68kg

Tellarini Series ECC Jet Stainless Steel Pump. Self Priming centrifugal jest pump. Pumps at a capacity of 10 to 60 l/min. Maximum pumping head 36m. Maximum suction at 8m. This pump is suitable for clean water at a temp of 45'cMaterials - Pump body and shaft = stainless steel AISI304 - Impeller/ Diffuser: Noryl - Seal : Ceramic/ Graphite/ NBR

Tellarini ENM ENT Brass Pump Units are self priming.They are fitted with an oversized single-phase asynchronous motor and long-lasting rotary switch, and they are designed for heavy duty applications.Thee pumps have a strong suction capacity, and can work even with a discontinuous presence of the liquid and the flow is reversible. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the suitability and choose appropriate gaskets.The product are particularly suitable for use:agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)professional use (continuous over time and heavy-duty applications, installation on systems)industry (installation on plant, machinery, machinery, production lines)Pump SpecificationsMaximum capacity : 28 lt/minMaximum head : 22 mGasket on the shaft: SealMaximum priming height : 6 mThreaded ports: 3/4"Maximum liquid density 1.1g/cm3 free of hard particles in suspensionMaximum temperature 90°CNot suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and firePossibility of reversing the pumping flowCoupling with impeller freeComplete with a pair of brass hose fittings for pipes 20 (one straight and one curved)Possibility of working for short periods with closed pipesDuring installation, the pump must be filled with liquid, subsequently this operation is no longer necessaryMaterials of ConstructionPump Parts: BrassCounter flange: AISI 304Shaft : AISI 316Impeller : BrassGaskets: NBRMotor SpecificationsPowered By A Motor Single-phase asynchronous 110V 50Hzequipped with mec motor 63 a 2800 g/min from 0.5 HP/ 0,4 KWService S1IP protection degree 44Insulation class FPower connection via cable end Cable with Schuko plug 2mSwitching on and reversing of the pumping flow through inverter switch