12v & 24v Pumps

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Bilge pumps. Suitable for clean, dirty, boat bilge water drainage applications.NOT CONTINUOUSLY RATED. FOR INTERMTTENT USE ONLY.All the voltage motors have brushes and a duty cylcle of approx twenty minutes in every hour.

Sotera’s SS400 Chemtraveller short-frame series electric Santoprene® diaphragm pump is designed for the chemical transfer of agricultural pesticides, herbicides, fertilizers, mild acids, soaps, and water.The Sotera SS435B is a 12V DC non-explosion-proof chemical transfer pump that is capable of producing up to 13GPM at 15PSI (1 Bar) maximum pressure. The pump utilizes a glass-reinforced polypropylene housing that is designed with Santoprene® diaphragms, EPDM elastomers, Chemtraveller - Short Frame with 825 digital meter. The SS435B is designed to transfer agricultural chemicals, mild acids, soaps and water. Please always refer to the Sotera Chemical Resistance Guide for compatibility. This pump includes 1" accessories such as suction and discharge hose, ball valve nozzle with anti-drip tip, female camlock coupler, along with various fittings and clamps.Flow rates up to 13GPMMaximum outlet pressure 15 PSI (1 Bar)8" Hg 'Dry Lift' [9 ft (2.7M) of water]Maximum particle size up to 0.100" diameterPump can run dry without damageThermally protected motor

Mascontrol isa electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol12 Volt0.18Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4Kg

This a low voltage gear pump with built in bypass valve.Electric Gear pump for the delivering non-aggressive viscuos liquids which do not exceed a viscosity between 1° to 7°.Suitable especially for delivering water, wine, olive oil, milk, diesel and synthetic or mineral oils.Designed for oils it will pump 1450 l/h or 24 l/m max flow to 30metre.Supplied with On / Off switch and handle with lead and clips

Mascontrol is a electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol24 Volt0.37Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4KgH 165mm x W 210mm x L 250mm

NASTEC 4HS VSD BOREHOLE PUMPSThe NASTEC4HSseries is a range of 4” electric submersible pumps for borehole & well applications.Construction characteristics and use of specific materials allow 4HS to be suitable for drinking water applications.Features include;Built-in integrated inverter controlled by CM control module.Multistage pump made of AISI 304 stainless steel.Three-phase water-filled permanent magnet synchronous motor with encapsulated resin stator, fully constructed of AISI 304 stainless steel.The Pump Integrated Inverter provides the following features;Automatic variable pump speed to maintain set-pressure regardless of water demand. Thus the pump only operates at a speed that matches demand, significantly reducing power consumption and extending pump life.Starts and stops pump gently, thus reducing in-rush currents/power consumption & mechanical stresses.Protects pump and drive from abnormal conditions such as overload, surges, under/over-voltage, dry running, and any abnormal conditions.Integrated onboard inverter eliminates the requirement for expensive electrical filters and shielded cables and reduces electromagnetic emissions to absolute minimums.The 4HS product range matches applications in residential & commercial markets for water supply, water pressurization and irrigation.Compared to conventional solutions 4HS offers:Energy-saving operation.Quick and simplified application.System reliability..The 4HS range submersible pumps are designed to provide customers a ready to-use product. Packages include;4HS pump including 2,5 m / 8 ft flat cable lead (ACS-WRAS-KTM compliant)Surface control module (CM)Cable junction kitPressure transducer 0-16 bar / 0-250 psiOperating Manual

Non-modulating float valves fully when the liquid level in a tank reaches a pre-set low point. The opening operation allows for the tank to be refilled to a pre-set high point, at which time the valve closes drip-tight.Modulating float valves maintain a constant liquid level in a storage tank by compensating for variations in supply or demand and are used to control the flow into or out of a tank by either opening or closing on a rising level.Cla-Val Altitude Control Valves regulates the high water level in reservoirs without the need for floats or other devices. These non-throttling valves remain fully open until the pre-set shut-off point is reached. Altitude valves can be configured for one-way or two-way flow depending on system requirements and can be furnished with auxiliary controls for multiple functions such as pressure sustaining, pressure reduction, rate-of-flow control, solenoid override or other parameters as needed.

Battery powered self priming pump for fuel oil transfer.Complete with trigger gun,suction 2m and delivery4m hoses, filter & hosetails and clips 3/4" inlet and outlet. 40 litres per min max flow and 4m suction lift.12v 16 amp motor supplied with lead and battery clipsVane pump for positive priming with by pass

Bi-pump self priming rotary vane pump designed for transferring diesel at high flow rates. Equipped with a built in bypass within the pump body. Plastic carrying case with handle, on/off switch, fuse, suction filter and two metre of battery cable with clips. will perform two metres suction without a foot valve, four metres suction with a foot valve strainer.

Bi-pump self priming rotary vane pump designed for transferring diesel at high flow rates. Equipped with a built in bypass within the pump body. Plastic carrying case with handle, on/off switch, fuse, suction filter and two metre of battery cable with clips. will perform two metres suction without a foot valve, four metres suction with a foot valve strainer.

BILGE PUMP 03602 12v 1' 1400GPH

TMC caravan pump - compact design with a wide variety of uses including emptying and filling, transfer of clean nuisance water containing no solid matter

TMC caravan pump - compact design with a wide variety of uses including emptying and filling, transfer of clean nuisance water containing no solid matter

When the Maxprobepipe inspection inspection system was launched last month at the No-dig Live show in Peterbourgh it created plenty of interest. The Maxprobe has many innovative new features, however one of the highlights is that every system comes with embedded Wincan reporting software as standard and at no extra cost! The Maxprobe can also be used with any existing Wincan office software you may already have a licence for.The Software incorporated in the Maxprobe is leadingedge with future updates guaranteed withmany new features already in the pipeline. In addition, the Maxprobe includes a System Health Status page.The Maxprobe is designed to meet IP54 waterproof rating and all CE FCC and Metlab worldwide approvals. Scanprobe recognised that viewing a screen in bright sun light has always been a problem therefore the Maxprobe pipe inspection system comes with the largest Superbright LCD screen in its class which is readable in direct bright sun light.There are many features that the Maxprobe comes with as standard such as Wifi compatibility, Li-ion battery with up to 8 hours running time, bespoke Scanprobe reporting software, help screen, innovative easy-mount coiler to control box interface, purpose build very rugged lightweight control box, ergonomic intelligent waterproof keyboard, the list goes on

CDI-H27 pumps are a five chamber positive displacement diaphragm pump with a built in bypass within the pump body.Maximum suction lift 2 metres. All models have on/off switches. Designed for pumping AD Blue (AUS32-DEF-ADBLUE) with no solid suspended particles, fibres or abrasive materials.NOT for pumping petrol.Low voltage models have a duty cycle of approx 20 minutes in every hour. Complete with 1.5 metres of power cable and UK plug on the 230v model.Battery clamps for low voltage models.IP54. 1" hose tails / 1" - ¾ hose tails supplied.

These rugged and economical ventilators deliver exceptional air flow in a compact, lightweight design – and their non-corrosive injection-molded housings are nearly indestructible. The Cadet is ideal for confined space ventilation of underground utilities and light manufacturing facilities. Hazardous and non-hazardous location models are available; multiple electrical options are available as well.CADET® FEATURES & ADVANTAGES:Non-corrosive, flame-resistant, injection-molded housingsCarrying handleFixed guide vane for optimal performanceSafety screens per OSHA; plated steelEasily attach 8” duct (203 mm) to inlet & outletGlass-reinforced, polyester resin, spark-resistant fan bladeReversible, locking, inlet flange for ducted and non-ducted applications60 Hz or 50 Hz AC motors115V or 230V (60 Hz), and 110V or 220V (50 Hz) options availableAuto thermal overload protection15 ft (4.57 m) cordPlug end (115V only)88 dBA @ 5 ft (1.5 m)

COPPUS TA16 Ventilator delivers high static pressure and volume for fundamentally safe operation. Along with allowing for extremely large air volumes, the unique fan blade design maximizes static pressure, resulting in improved performance across longer runs of air ducts. This fan is frequently used to cool huge tanks, tunnels, towers, and shipboard compartments; it is also an excellent choice for cooling products and processes.

CHICAGO PNEUMATIC CP0077 SLUDGE PUMPFEATURESCan handle liquids containing up to 15 percent solids and including particles up to 1” (25 mm) in sizeSuitable for pumping seawater and certain corrosive chemicalsShould not be used to pump flammable liquidsHas no motor or diaphragm to wear out because it operates on venturi/ejector principleExhaust muffler - reduces noise levelNo damage if running without loadIntake hose end must be fully submerged for optimal performance

the 230v Ecoil Engine oil removal kit comprises of a self priming oil pump mounted on a portable trolly with mounted oil container and 4 dipstick lances fitted into the trolly handle.Fit the 230v battery leads to the car. Truck or tractor battery and change the sump oil without having to get under the vehicle.

VLB, AL, PM and EUROSTAR are mainly used for clean water boosting. VLB is not self priming.VLB, AL and EUROSTAR can be bulit up as automatic booster sets using a pressure vessel.NOT CONTINUOUSLY RATED. FOR INTERMITTENT USE ONLY.All low voltage motors have brushes and a duty cycle of approximately twenty minutes in every hour.

VLB, AL, PM and EUROSTAR are mainly used for clean water boosting. VLB is not self priming.VLB, AL and EUROSTAR can be bulit up as automatic booster sets using a pressure vessel.NOT CONTINUOUSLY RATED. FOR INTERMITTENT USE ONLY.All low voltage motors have brushes and a duty cycle of approximately twenty minutes in every hour.

The 12 volt battery low voltage drum pump is designed for fuel oil, and light liquid pumping from barrels or tanks.The low voltage pump will deliver 40 l/m max flow and a max head of 6m. Built in switch and safety fuse on handle.Supplied with leads with battery clips, 2m delivery hose kit with swivel connectors, trigger gun and suction tube with barrel adaptor to fit 205 litre drums.The FA-12 is a drum pump with a metal inlet tube - approx. 1 metre long – that goes to the bottom of the drum.The outlet hose is approx. 2 metres in length with a fitting swaged to it on one end – that screws into the pump, and has the trigger nozzle swaged into the other end.

A 12v low voltage light alloy self priming pump for fuel oil transfer.. Low suction lift 3m 40 l/m max flow and 7m max head. Supplied with on / off switch and lead with battery clips

Hyundai 2 inch (50 mm) Electric Start Diesel Chemical Water PumpDiesel-driven water pump with a 50 mm inlet/outlet (2 inch bore approximately )Tough plastic pump, specifically for pumping corrosive liquids, chemicals, liquid fertiliser or sea water6 HP four stroke diesel electric key start engineMaximum pumping head of 35 m and lift of 7 mAll Hyundai power equipment is covered with a 3 years warrantyProduct DescriptionHyundai 2 inch (50 mm) Electric Start Diesel Chemical Water Pump DHYC50LEBox Contains1 x Diesel Water Pump1 x Manual

Maximum discharge amount: 17.6 gal/min (80 L/minMaximum Lifting Height: 49.2 ft (14 m)Operating temperature range: 140°F (60°C).Drive Method: Electric motorPower Supply: AC 100 V, Single Phase 4 A.Frequency: 50/60 Hz continuous rating.Output: 160WCord: 16.5 ft (4.7 m).

Battery powered self priming pump for fuel oil transfer. 3/4" inlet and outlet. 40 litres per min max flow and 4m suction lift. 12v 16 amp motor supplied with lead and battery clips. Vane pump for positive priming with by pass valve.

Battery powered self priming pump for fuel oil transfer. 3/4" inlet and outlet. 40 litres per min max flow and 4m suction lift. 24v 16 amp motor supplied with lead and battery clips. Vane pump for positive priming with by pass valve.

PM/PT brass self priming pumps.Pump body, impeller and cover made of brass. Stainless steel shaft.Four metres maximum suction depth. Clean liquids only with no solids or abrasives. Can be used for pumping juice, vinegar and diesel oil.NOT CONTINUOUSLY RATED. FOR INTERMITTENT USE ONLY. All low voltage motors have brushes and a duty cycle of approximately twenty minutes in every hour.PM25Peripheral ring impeller12v (32 Amps) or 24V Available (20 Amps)35 Litres Per Minute Maximum10 Metres Head MaximumMaximum suction lift 4 Metres1" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 140mm x W 175mm x L 320mm9.0KgSuitable for juice, vinegar and diesel oil

PM/PT brass self priming pumps.Pump body, impeller and cover made of brass. Stainless steel shaft.Four metres maximum suction depth. Clean liquids only with no solids or abrasives. Can be used for pumping juice, vinegar and diesel oil.NOT CONTINUOUSLY RATED. FOR INTERMITTENT USE ONLY. All low voltage motors have brushes and a duty cycle of approximately twenty minutes in every hour.PM25Peripheral ring impeller12v (32 Amps) or 24V Available (20 Amps)35 Litres Per Minute Maximum10 Metres Head MaximumMaximum suction lift 4 Metres1" Inlet & Outlet, Hosetails supplied which are unique to the pumpH 140mm x W 175mm x L 320mm9.0KgSuitable for juice, vinegar and diesel oil

Small light-weight and portable. These pumps are usable for a wide range of application, as well as bilge discharge.No rust, shock resistant by using high grade ABS resin, SUS-304 stainless steel and an aluminium alloy to prevent sea-water corrosion.Durable for long operations by a unique cooling system. (SK-2512, SK- 2524)Perfect discharge of bilge-water as its impeller was designed to be at the lowest position.These submersible pumps are developed for both seaand clean water. Its main uses are for bilge discharge,water feeding into and discharging from fish preserves, fish washing and various other uses.Please refrein from using these pumps for any civil and construction warks,pumping liquids that contain sediments.

The 12 volt battery PTP low voltage drum pump is designed for fuel oil pumping from barrels or tanks..The low voltage pump will deliver 40 l/m max flow and a max head of 12m.Supplied with leads with battery clips, 2m delivery hose kit, trigger gun and suction tube with barrel adaptor to fit 205 litre drums.PTP low voltage drum pump12 0r 24 Volt AvailableDesigned for fuel oil pumping from barrels or tanks40 litres per minute maximum12 metres head maximumSupplied with leads with battery clips, 2m delivery hose kit, trigger gun and suction tube with barrel adaptor to fit 205 litre drumsSee PDF for more details

QMD20-SI2 Electronic single phase direct start control panel for 2 electric pumps.Electronic control panel withthermal protectionagainst motor overload and equipped withintegrated motor exchanger.It is suitable for surface pumps, submerged pumps (without probes) and motorsin general, with power range between 0,37 kW and 2,2kW (please download the data sheet to learn more about all theavailable sizesand features).It can be used for emptying(drainage), filling or pressurization.Electric control panel with thermoplastic case andIP50protection degree,extendable to IP55.Inputs and outputsN. 3 inputs for floats or pressure switches;FunctionsCommand with selector and LEDs;Emptying or filling mode switch;Second pump delayed start 0s/4s (selectable);Alternated start of pumps (excludable);Non contemporary start of pumps;Main disconnecting switch with door lock;ProtectionsThermal relay protection against motor overload;Motor protection fuses;Very low voltage inputs;

Robin gasoline Water pump EY15.Engine type: 1-cylinder, 4-stroke, air-cooled gasoline engineGasoline engine model: Gasoline engine EY15 capacity: 163CCMax. Output: 3.5HP/4000rpmIgnition system: Non-transistorStarting system: RecoilFuel tank capacity 4 LiterContinuous operating time: 5 hoursEngine oil system capacity: 0.6 LiterWater pumpDiameter of outlet 2 inchMax. Delivery lift: 23mSuction height: 8mMax. Water displacement: 30m3/hr

Sanicubic 1 Single Heavy Duty Macerator PumpConnections - Toilet, Basin, Bathtub, Dishwasher, Kitchen Sink, Shower,Washing Machine & BidetDischarges - 11m Vertical / 110m HorizontalSANICUBIC 1 is a single pump heavy duty macerator suitable for up to two toilets and multiple other waste water producing appliances.Pumps up to 11 metres vertically and 100 metres horizontally50mm discharge pipeworkWorking waste water temperature 35 degrees CInlet diameter 110mm for black waste and 40mm for grey wasteSeparate isolating valves required but not suppliedIncludes visual alarmDimensions (Height x Width x Depth) -539 x 426 x 440Discharge Pipe Diameter (mm) - 50Electrical Supply (V) -220-240 / 50Horsepower - 32Max. Amperage (A) -40/50/100/110Maximum Temperature (°C) - 70Min. Gravity Fall on Horizontal Run - 3Motor Speed (RPM) - 2800

SPERONI PM 50 Bronze Self Priming Pump 2.5Hp 220V 1Phase 60Hz NPT.BRONZE Two Way Self Priming Transfer Pump— 3600GPH, 2.5HP, 2in. Ports – PM50 SPERONI.ApplicationThese bronze water pumps find their application in the transfer of salt water, clear water, oil and diesel and mixtures of liquids with these compounds. For the correct functioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid impurities. The special self-priming system allows priming up to 8 meters depth. The electric motor is fitted with a reverser which allows the pump to rotate in two directions. The bidirectional rotation obtained through the reverser makes transfer operations easier since the suction side can be used for delivery and the delivery side for suction.Operating ConditionsLiquid temperature up to 95°F (for home use according to EN 60335-2-41)Temperature max. liquid: 140°F (for other uses)Ambient temperature up to 104°FTotal suction lift up to 26 ft.MotorSingle-phase 220V – 60HzTwo-Pole induction motor (n = 3450 min-1)Insulation Class FProtection IP 44MaterialsPump body: BronzeMotor Support: Cast IronImpeller: BrassConnectors: BrassShaft with rotor: Stainless Steel AISI 304Double oil sealTechnical Specifications

Tsurumi BZ Submersible pumps are Non-clog impeller allows large diameter of foreign matter with respect to discharge bore. This ensures that waste water and sewage are efficiently transferred. The impeller comes out with the motor when the motor is removed from the pump casing (a back-pull-out design, upto 3,7kW).Delivery rate: 66m³/h – Pressure sidge: JIS4" – Delivery altitude: 13.5m – Power consumption: 2,2kW – Weight: 68kg

Tellarini Series ECC Jet Stainless Steel Pump. Self Priming centrifugal jest pump. Pumps at a capacity of 10 to 60 l/min. Maximum pumping head 36m. Maximum suction at 8m. This pump is suitable for clean water at a temp of 45'cMaterials - Pump body and shaft = stainless steel AISI304 - Impeller/ Diffuser: Noryl - Seal : Ceramic/ Graphite/ NBR

Tellarini ENM ENT Brass Pump Units are self priming.They are fitted with an oversized single-phase asynchronous motor and long-lasting rotary switch, and they are designed for heavy duty applications.Thee pumps have a strong suction capacity, and can work even with a discontinuous presence of the liquid and the flow is reversible. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the suitability and choose appropriate gaskets.The product are particularly suitable for use:agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)professional use (continuous over time and heavy-duty applications, installation on systems)industry (installation on plant, machinery, machinery, production lines)Pump SpecificationsMaximum capacity : 28 lt/minMaximum head : 22 mGasket on the shaft: SealMaximum priming height : 6 mThreaded ports: 3/4"Maximum liquid density 1.1g/cm3 free of hard particles in suspensionMaximum temperature 90°CNot suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and firePossibility of reversing the pumping flowCoupling with impeller freeComplete with a pair of brass hose fittings for pipes 20 (one straight and one curved)Possibility of working for short periods with closed pipesDuring installation, the pump must be filled with liquid, subsequently this operation is no longer necessaryMaterials of ConstructionPump Parts: BrassCounter flange: AISI 304Shaft : AISI 316Impeller : BrassGaskets: NBRMotor SpecificationsPowered By A Motor Single-phase asynchronous 110V 50Hzequipped with mec motor 63 a 2800 g/min from 0.5 HP/ 0,4 KWService S1IP protection degree 44Insulation class FPower connection via cable end Cable with Schuko plug 2mSwitching on and reversing of the pumping flow through inverter switch

TMC Flexible Impeller Pump designed to transfer clean and dirty water with the advantage of being self priming from 0.5 metres vertically from dry. 1" hose inlet / 1" hose outlet. 10 amp fused.

TMC flexible impeller with a maccerator before the impeller. Used to transfer clean and dirty water containing domestic sewage and soft toilet paper. Can prime 0.5 metres vertically for dry. Not designed for macerating sanitry towels, nappies towels etc. 1 1/2" inlet/ 1" outlet. 25 amp fused. Do not dry run

TMC flexible impeller with a maccerator before the impeller. Used to transfer clean and dirty water containing domestic sewage and soft toilet paper. Can prime 0.5 metres vertically for dry. Not designed for macerating sanitry towels, nappies towels etc. 1 1/2" inlet/ 1" outlet. 25 amp fused. Do not dry run

Self priming bronze gear pump. Suitable for pumping diesel and light weight oils. Complete with inline fuse. Can prime (wet) up to 2.5m. Recommended maximum oil thickness SAE 20W/50. Inline filter on the inlet with spare gauze.

Self priming bronze gear pump. Suitable for pumping diesel and light weight oils. Complete with inline fuse. Can prime (wet) up to 2.5m. Recommended maximum oil thickness SAE 20W/50. Inline filter on the inlet with spare gauze.

TMC float switch to adapt to low voltage 12v or 24v bilge pumps for automatic n and off operation.complete with one metre of lead.swithces on at approx 40mm and off at 5mm water levels