PTO & Bare Shaft Pumps

GMP Bare shaft pump for most types of drainage and irrigation duties. For clean and black water, hard wearing cast iron construction with mechanicial seal. Foot mounted with pulley.Self priming with a non return valve fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again.More models available from GMP include high pressure, trash duty and bronze versions.H1 AS72 Bare Shaft c/w PulleyCentrifugal ImpellerPulley 100 x 2A300 Litres per minute at 2900 RPM16 Metres head at 2900 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees1½" Female BSP Inlet & Outlet0.75KwH 300mm x W 180mm x L 235mm14.1KgSuitable for pumping clean and black water

Bare shaft pump for all type of drainage and irigation dutys.Hard wearing cast iron construction with mechanicial seal.Foot mounted with pully 100mm x 2A supplied. Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.H2 AS61 Bare Shaft c/w PulleyCentrifugal ImpellerPulley 100 x 2A480 Litres per minute at 2900 RPM18 Metres head at 2900 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees2" Female BSP Inlet & Outlet1.5KwH 300mm x W 185mm x L 275mm16.1KgSuitable for pumping clean and black water

PTO powered pump for all farm and construction duty.. 2" cast iron self priming pump. 600 litres per min flow max head 25 metre.Self priming pump with gearbox for connecting to tractors by a universal joint. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.PTO AM23Centrifugal ImpellerRatio 1:7,8650 Litres per minute at 4000 RPM34 Metres head at 4000 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees2" Female BSP Inlet & Outlet4KwH 388mm x W 218mm x L 395mm20KgSuitable for pumping clean and black water

Bare shaft pump for all type of drainage and irigation dutys.Hard wearing cast iron construction with mechanicial seal.Foot mounted with pully 100mm x 2A supplied. Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.H2 AS61 Bare Shaft c/w PulleyCentrifugal ImpellerPulley 100 x 2A900 Litres per minute at 2900 RPM16 Metres head at 2900 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees2" Female BSP Inlet & Outlet1.5KwH 300mm x W 185mm x L 275mm16.1KgSuitable for pumping clean and black water

Bare shaft pump for all type of drainage and irigation dutys.Hard wearing cast iron construction with mechanicial seal.Foot mounted with pully 100mm x 2A supplied. Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.

Bare shaft pump for all type of drainage and irigation dutys.Hard wearing cast iron construction with mechanicial seal.Foot mounted with pully 100mm x 2A supplied. Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.

Bare shaft pump for all type of drainage and irigation dutys.Hard wearing cast iron construction with mechanicial seal.Foot mounted with pully 100mm x 2A supplied.Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.NOT KEPT IN STOCK - ORDERED UPON REQUEST H5H ASB3 Bare Shaft c/w PulleyCentrifugal ImpellerPulley 100 x 2A1300 Litres per minute at 2900 RPM47 Metres head at 2900 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees3" Female BSP Inlet & Outlet9.2KwH 409mm x W 285mm x L 580mm57KgSuitable for pumping clean and black waterNOT KEPT IN STOCK - ORDERED UPON REQUEST

GMP 3" PTO Bare Shaft Self Priming Pump H5H ASP7. Bare shaft pump for all type of drainage and irigation duties. Hard wearing cast iron construction with mechanicial seal. Foot mounted with pully 100mm x 2A supplied.Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 70 degrees C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available.H2 AS61 Bare Shaft c/w PulleyCentrifugal ImpellerPulley 100 x 2A870 Litres per minute at 2900 RPM48 Metres head at 2900 RPM6 Metres Maximum suction liftMaximum liquid temperature 60 Degrees2" Female BSP Inlet & Outlet1.5KwH 300mm x W 185mm x L 275mm16.1KgSuitable for pumping clean and black water