Shopping Basket
Items 0
Total £0.00
  • Home
  • About Us
  • Contact Us

Air Jetting Rings. Pumpsdirect2u. Contact us on 0800 6226479. Pumpsdirect2u are specialists in supplying Air Jetting Rings. Please visit our website to view Air Jetting RingsWe have a large stock of Air Jetting Rings. If you have any questions about our Air Jetting Rings range, please don't hesitate to ask about our Air Jetting Rings Sets

Displaying 1 - 8 (of 11 products)  View All ›
1 2 | Next 
3 Silt Jetting Ring
View Product
Silt Jetting Ringfor 3 Pumps.Attach to Pump Inlet Flange.These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer. SILT JETTING RINGSFor 3" 4" 6" and 8" Pumps.Attach to Pump Inlet Flange.These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer.S4THL Pump with Jetting Ring.S6T Pump with Jetting Ring in use on a creek bed dredging job.External Water Supply Fire Hydrant or Separate Water Pump Water Flow Required 2" and 3" Pumps 75 - 250 GPM 4" to 8" Pumps 250 - 500 GPM Water Pressure Required 50 - 150 PSI.S3T Pump with Jetting Ring Used on gold mining job.Input flow to be adjusted on-site to achieve optimal results.
       
3
3 Silt Jetting Ring
Decrease Quantity Increase Quantity
£3,995.00
4" Diver Strainer
View Product
For 4 Pumps.Attach to Suction Hose. This strainer can be used by divers to move the end of a suction hose to work solids into suspension so the mixture can be pumped. It attaches to the suction hose which is connected to the inlet side of the submersible pump.
       
N/A
4" Diver Strainer
Decrease Quantity Increase Quantity
£599.00
4 Silt Jetting Ring
View Product
Silt Jetting Ring for 4 Pumps.Attach to Pump Inlet Flange. These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer. SILT JETTING RINGSFor 3" 4" 6" and 8" Pumps.Attach to Pump Inlet Flange.These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer.S4THL Pump with Jetting Ring.S6T Pump with Jetting Ring in use on a creek bed dredging job.External Water Supply Fire Hydrant or Separate Water Pump Water Flow Required 2" and 3" Pumps 75 - 250 GPM 4" to 8" Pumps 250 - 500 GPM Water Pressure Required 50 - 150 PSI.S3T Pump with Jetting Ring Used on gold mining job.Input flow to be adjusted on-site to achieve optimal results.
       
4
4 Silt Jetting Ring
Decrease Quantity Increase Quantity
£4,995.00
6" Diver Strainer
View Product
Diver Strainer for 6 Pumps.Attach to Suction Hose. This strainer can be used by divers to move the end of a suction hose to work solids into suspension so the mixture can be pumped. It attaches to the suction hose which is connected to the inlet side of the submersible pump.
       
N/A
6" Diver Strainer
Decrease Quantity Increase Quantity
£899.00
6" Silt Jetting Ring
View Product
Silt Jetting Ring for 6 Pumps.Attach to Pump Inlet Flange. These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer. SILT JETTING RINGSFor 3" 4" 6" and 8" Pumps.Attach to Pump Inlet Flange.These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer.S4THL Pump with Jetting Ring.S6T Pump with Jetting Ring in use on a creek bed dredging job.External Water Supply Fire Hydrant or Separate Water Pump Water Flow Required 2" and 3" Pumps 75 - 250 GPM 4" to 8" Pumps 250 - 500 GPM Water Pressure Required 50 - 150 PSI.S3T Pump with Jetting Ring Used on gold mining job.Input flow to be adjusted on-site to achieve optimal results.
       
6
6" Silt Jetting Ring
Decrease Quantity Increase Quantity
£7,995.00
8" Silt Jetting Ring
View Product
Silt Jetting Ring for 8 Pumps.Attach to Pump Inlet Flange. These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer. SILT JETTING RINGSFor 3" 4" 6" and 8" Pumps.Attach to Pump Inlet Flange.These jetting rings are used in conjunction with an external water supply to agitate solid material into suspension to allow the mixture to be pumped. These devices bolt directly to the bottom (inlet flange) of the pump in place of the strainer.S4THL Pump with Jetting Ring.S6T Pump with Jetting Ring in use on a creek bed dredging job.External Water Supply Fire Hydrant or Separate Water Pump Water Flow Required 2" and 3" Pumps 75 - 250 GPM 4" to 8" Pumps 250 - 500 GPM Water Pressure Required 50 - 150 PSI.S3T Pump with Jetting Ring Used on gold mining job.Input flow to be adjusted on-site to achieve optimal results.
       
8
8" Silt Jetting Ring
Decrease Quantity Increase Quantity
£13,995.00
Coppus model 3-HP Venturi 8" (203mm)
View Product
Coppus model 3-HP Venturi 8" (203mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts).Operating PrincipleCompressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr)Induction ratios up to 40:1Multiple expansion nozzles machined into housingHigh static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP)No moving parts virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all modelsAccepts flexible duct on diffuser end (optional duct adapter for inlet end available)Tripod for stationary mounting available
       
3-HP
Coppus model 3-HP Venturi 8" (203mm)
Decrease Quantity Increase Quantity
£1,222.99
Coppus model 3S-HP Venturi 8" (203mm)
View Product
Coppus model 3S-HP Venturi 8" (203mm).High-Performance, Highly-Efficient Venturi Air MoversThe unmatched performance of the COPPUS Jectair HP is recognized throughout the industry. When compared with older-style air horns, the patented air mixing chamber of the Jectair HP produces up to 26 percent savings on compressed air consumption (see efficiency performance charts). Operating Principle Compressed air or steam is admitted to the Jectair through a single inlet connection in the housing leading to the mixing chamber. The air or steam jetted from the nozzle creates a Venturi action which induces a large volume of surrounding air to enter the Jectair through the aerodynamic inlet bell. The air is then discharged at high velocity through the horn-shaped diffuser. NOTE: Operating efficiency depends on compressed air volume and pressure (see performance/efficiency charts).FeaturesAvailable in five sizes: 9, 8, 6-HP, 3-HP, 3S-HPHigh-Performance (HP) and Hornet models available in three sizes: 6-HP, 3-HP and 3S-HPAir flows range from 1,370 to 8,900 cfm (2,328 to 15,121m3/hr) Induction ratios up to 40:1Multiple expansion nozzles machined into housing. High static pressure capabilitiesDiffuser material available in steel, aluminum or shock-resistant polymer (Hornet HP) No moving parts virtually maintenance-freeStatic bonding cable with spring tension grip and replaceable contact tips standard on all models. Accepts flexible duct on diffuser end (optional duct adapter for inlet end available) Tripod for stationary mounting available
       
3S-HP
Coppus model 3S-HP Venturi 8" (203mm)
Decrease Quantity Increase Quantity
£1,222.95
1 2 | Next 
Accessories & Fittings Air Conditioning & Fans Booster Pumps Sets
Borehole and Well Pumps Control panels Diaphragm Pumps
Diaphragm Air Pumps Diesel Engine Pumps Diesel Fuel Tanks
Drum & Hand Pumps Electric Motors Engines - Petrol & Diesel
Float Switches Flood Pump Kits Fuel Transfer Pumps
Generators Heaters Hose - Suction/Delivery
Jetting Rings Petrol Engine Pumps Portable Chemical Toilets
Progressive Cavity Pumps PTO & Bare Shaft Pumps Pump Parts
Ponstar Puddle Pumps Pump End ONLY Sewage Pumping Stations
Shower Pumps Solar Powered Sub Pumps Submersible Pumps SS316
Submersible Sewage Pumps Submersible Water Pumps Surface Mounted Pumps-HD
Surface Mounted Pumps Swimming Pool Pumps 12v & 24v Pumps
Water Filters
 
Fast Delivery