Shopping Basket
Items 0
Total £0.00
  • Home
  • About Us
  • Contact Us

Contact our Head Office on +44 (0) 800 622 6479. Pumpsdirect2u are specialists in providing Pump Protection Equipment, featuring a wide range of Pump Protection Equipment to suite your Pump Protection Equipment requirements.  Feel free to browse our Pump Protection Equipment; if you have any questions about our Protection Equipment range, or queries our support team will be happy to help.

Displaying 1 - 8 (of 14 products)  View All ›
1 2 | Next 
12v Presscontrol Electronic Pressure Switch
View Product
Mascontrol isa electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol12 Volt0.18Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4Kg
       
060-432
12v Presscontrol Electronic Pressure Switch
Decrease Quantity Increase Quantity
£146.00
24v Presscontrol Electronic Pressure Switch
View Product
Mascontrol is a electronic pressure switch and protection device. They can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per minute.The mascontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.A solenoid must be installed if the pump being used has a high wattage/current rating.Mascontrol24 Volt0.37Kw Maximum20 Amp Maximum1" Male BSP Inlet/Outlet1.4KgH 165mm x W 210mm x L 250mm
       
060-434
24v Presscontrol Electronic Pressure Switch
Decrease Quantity Increase Quantity
£146.00
Controlpress Electronic Pressure Switch 230v
View Product
The 230v Presscontrol is a electronic pressure switch and protection device.Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.Suitable for most water systems from well, tank or low pressure mains.Anotherversion called the controlpress is available for pumps with larger motors to be installed.Presscontrol230 Volt1.5Kw Maximum8 Amp Maximum1" Male BSP Inlet/Outlet1.4KgAutomatically turns on and off a pump
       
060-438
Controlpress Electronic Pressure Switch 230v
Decrease Quantity Increase Quantity
£260.00
DIVER/MATIC
View Product
DIVER/MATIC is a portable signalling apparatus, visual and acoustic, for the gauging of the water level in a borehole. DIVER/MATIC is equipped of a metric cable, number by a 0-200 m scale and roll up cable with bracket. For its working and power supply it is enough a standard 9 Vcc pile, included with the device. Thanks to the indelible marked metric numeration on the cable sheath, it is possible to read the distance from the water surface by means of the bipolar probe, which provides to turn on a LED and its relative acoustic signal. Probe 16 mm 120 mm length
       
030-660
DIVER/MATIC
Decrease Quantity Increase Quantity
£299.99
Mac Hydrocontroller Hydro Controller Inverter Driver 230v
View Product
The Hydrocontroller is used to continuously regluate the rotation speed of elctro pumps, thus ensuring a contante pressure despite varying flow. This unit can be used for water cooling.For Installation directly on the pipelineSet Pressure 1.0-7.5 bar230v2.2Kw8AmpMax Over Pressure 12 barLCD DisplayInput/ Output 11.4" FemaleOutput frequency 60HtzHxLxW mm 360x246x170Weight 2.5kg
       
HCW MT
Mac Hydrocontroller Hydro Controller Inverter Driver 230v
Decrease Quantity Increase Quantity
£999.00
Presscontrol 110v Electronic Pressure Switch
View Product
The 230v Presscontrol is a electronic pressure switch and protection device.Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.The 110v Presscontrol is a electronic pressure switch and protection device.Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.Suitable for most water systems from well, tank or low pressure mains.Anotherversion called the controlpress is available for pumps with larger motors to be installed.Presscontrol110 Volt1.5Kw Maximum8 Amp Maximum1" Male BSP Inlet/Outlet1.4KgAutomatically turns on and off a pump
       
060-429
Presscontrol 110v Electronic Pressure Switch
Decrease Quantity Increase Quantity
£110.00
Presscontrol 230v Electronic Pressure Switch
View Product
The 230v Fuel Presscontrol is a electronic pressure switch and protection device.Can be fitted to almost any fuel oil pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per miN.The fuel oil presscontrol will turn off in the case of no fluid to protect the pump from dry running.Fuel Presscontrol230 Volt1.5Kw Maximum8 Amp Maximum1" Male BSP Inlet/Outlet1.4KgAutomatically turns on and off a pump
       
060-430
Presscontrol 230v Electronic Pressure Switch
Decrease Quantity Increase Quantity
£97.00
Presscontrol 230v Electronic Pressure Switch
View Product
The 230v Presscontrol is a electronic pressure switch and protection device.Can be fitted to almost any pump with an outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The presscontrol will turn off in the case of no water to protect the pump from dry running.Suitable for most water systems from well, tank or low pressure mains.Another version called the controlpress is available for pumps with larger motors to be installed.Presscontrol230 Volt1.5Kw Maximum8 Amp Maximum1" Male BSP Inlet/Outlet1.4KgAutomatically turns on and off a pump
       
060-430
Presscontrol 230v Electronic Pressure Switch
Decrease Quantity Increase Quantity
£110.00
1 2 | Next 
Basic Control Panels Full Control Panels Variable Speed Drives (VSD)
Capacitor Overload Protection Equipment Pump Protection Equipment
 
Fast Delivery