Shopping Basket
Items 0
Total £0.00
  • Home
  • About Us
  • Contact Us
Displaying 1 - 8 (of 10 products)  View All ›
1 2 | Next 
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 1000 ES Stainless Steel
View Product
This desiccant dehumidifier works according tot he adsorption principle. This not only allows a reliable and high dehumidification performance even at low suction temperatures, but it also enables to achieves lower dew points than condensation dehumidifiers.Due to the serially integrated heat recycling process as well as the electronic energy management, the TTR 1000 like all other desiccant dehumidifiers belongs to the most economical of its kind!Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 1000 is a reliable dehumidifier.The TTR 1000 ES desiccant dehumidifier has a stainless steel housing. That stainless steel housing not only protects the adsorption dryer against corrosion, but also allows you to set up the TTR 1000 ES at places where the highest hygiene requirements are desired, such as in the food or pharmaceutical industry!Benefits in practice:Robust high-quality units “Made in Germany”High dehumidification performance even at low temperaturesReliable silicagel sorption rotors in a washable and mechanically high-tensile designIntegrated heat recycling processElectrical regeneration heatersMicro-processor control with plain text display for functional monitoring and energy managementStainless steel housingTechnical data of the TTR 1000:Dehumidification performance: 5.5kg/hAir flow rate: 1000m³/h at 250 PaElectrical connection: 3x400 V / 50 HzSound level (Distance 1 m): 70 dB(A)Regeneration air heater: 6.5 kWPower consumption max.: 8 kWDimensions L x W x H: 750 x 710 x 1,390 mmWeight: 154 kgpossible additional options:Transport frame, stackable with weather-proofing equipmentSwivel castersFilter monitoringHygrostatHumidity measurement unit with displayMoisture control
       
TTR 1000 ES
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 1000 ES Stainless Steel
Decrease Quantity Increase Quantity
£12,999.99
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 1400
View Product
The TTR800 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 177,6 kg a day and air flow rate of 1.750 m³/h at 300 Pa.This low-maintenance desiccant dehumidifier of German high-quality manufacturing ensures not only high dehumidification values even at low dew points – owing to its stainless steel housing, the TTR1400 is also known for a high corrosion resistance and good hygiene characteristics.For this reason the industrial desiccant dehumidifier is ideally suited for all operational environments with special hygienic standards, low temperatures or particularly material-straining conditions – it is hence the perfect solution for many dry keeping tasks or the production of dry air in thechemical,pharmaceuticalandfoodindustryas well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example inwater processing facilitiesor electrical control centres.Due to the comprehensive standard equipment the TTR1400 can be adjusted to various application requirements without difficulty. Be it electronic regeneration heating, rotation control, overtemperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR1400 has many practice-oriented equipment features and thanks tonumerous equipment optionscan moreover be equipped precisely to meet your individual needs.Another special feature of this industrial desiccant dehumidifier is the integrated Duoventic air volume regulation. Working according to theTTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation the TTR1400 comes equipped with separate fans per circuit; using Duoventic these can be controlled independently via an infinitely variable electronic regulation. This enables the fine adjustment of moisture content and volumetric flow of the dry air required without the need to e.g. install energy-wasting throttle valves to regulate the air volume as has often been customary so far.And in case of stationary industrial applications the TTR1400 further scores with its configurable air direction reversal. With the operator side always facing the user, the air flow direction can easily be adjusted to your individual processes as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR1400 the air direction reversal can be carried out with minimal effort.
       
TTR 1400
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 1400
Decrease Quantity Increase Quantity
£11,999.99
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 2000
View Product
The TTR2000 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 259,2 kg a day and air flow rate of 2,350 m³/h at 300 Pa.Several hundred kilogrammes of dehumidification performance per day present no challenge for the TTR2000 – not even in cold ambient conditions with low dew points. Therefore the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial,haulageorutility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.With the standard stainless steel housing and an electrical control box with protection type IP44 the corrosion-proof TTR2000 withstands even the harshest of environmental conditions and is therefore ideally suited for all applications related to dry keeping or the production of dry air at low temperatures or under particularly material-straining conditions – also in hygiene-sensitive areas.It is no coincidence that with the TTR2000 you benefit from an equally durable and easy-to-service construction – after all it is a desiccant dehumidifier originally produced by Trotec, developed and manufactured in Germany according to the highest quality standards, which houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers.Comprehensive standard equipment emphasises the excellent value-for-money ratio of this industrial desiccant dehumidifier: Be it electronic regeneration heating, rotation control, over temperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR2000 has many practice-oriented equipment features and thanks tonumerous equipment optionscan moreover be equipped precisely to meet your individual needs.Owing to the integrated Duoventic air volume regulation the TTR2000, working according to theTTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation, can further be adjusted precisely to the required degree of humidity and the dry air volume. For this purpose using Duoventic two separate fans can be controlled independently via an infinitely variable electronic regulation. As a result there is no need to install any energy-wasting throttle valves for air volume regulation.Another practical detail for stationary industrial applications, especially with pipe connections, is the configurable air direction reversal of the TTR2000. With the operator side always facing the user, the air flow direction can easily be adjusted to your individual processes as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR2000 the air direction reversal can be carried out with minimal effort.
       
TTR 2000
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 2000
Decrease Quantity Increase Quantity
£14,999.99
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 250 HP
View Product
The TTR 250 HP is not only standard-equipped with a radial fan but also with an additional extra-powerful fan motor which allows an especially high compression from 5600 Pa.This makes this air dehumidifier especially well-suited for applications where air has to be transported over long distances or several levels, for example e.g. shafts, basements, bunkers, cable stage etc.).Alternatively, the dryer can be configured so that it brings the dry process with high pressure air to where it is needed, eg in silos.Technical data:Pressure rise moisture air:Dehumidification*: 1.0 kg/hDry air rate (free blowing): 240 m³/hDry air rate (minimal): 120 m³/hDry air rate (nominal): 200 m³/hRegeneration air rate (nominal): 90 m³/hExt. compression (nominal): 5600 PaRegeneration air heating: PTCPower supply: 230V - 50/60HzPower input (nominal): 2.7 kWCurrent consumption INenn: 13.5 ARecommended protection: C16/16A gGLength: 350 mmWidth: 350 mmHeight: 860 mmWeight: 45 kgPressure rise dry air:Dehumidification*: 1.0 kg/hDry air rate (free blowing): 150 m³/hDry air rate (minimal): 100 m³/hDry air rate (nominal): 120 m³/hRegeneration air rate (nominal): 50 m³/hExt. compression (nominal): 2500 PaRegeneration air heating: PTCPower supply: 230V - 50/60HzPower input (nominal): 2.1 kWCurrent consumption INenn: 11.5 ARecommended protection: C16/16A gGLength: 350 mmWidth: 350 mmHeight: 860 mmWeight: 45 kg
       
TTR 250 HP
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 250 HP
Decrease Quantity Increase Quantity
£4,799.99
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 2800
View Product
The TTR2800 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 367,8 kg a day and air flow rate of 3.150 m³/h at 300 Pa.With the TTR2800 you have an equally durable and easy-to-service product and benefit from the advantages of an industrial desiccant dehumidifier, developed and manufactured in Germany according to the highest quality standards, which houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers.Comprehensive standard equipment emphasises the excellent value-for-money ratio of this industrial desiccant dehumidifier: Be it electronic regeneration heating, rotation control, over temperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR2800 has many practice-oriented equipment features and thanks tonumerous equipment optionscan moreover be equipped precisely to meet your individual needs.A robust stainless steel housing and integrated electrical control box with protection type IP44 are also part of the standard equipment of the TTR2800. Best prerequisites for dry keeping, gas dehumidification or the production of dry air in thechemical,pharmaceuticalandfoodindustryas well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example inwater processing facilitiesor electrical control centres.And in case of stationary industrial applications the TTR2800 further scores with its configurable air direction reversal. With the operator side always facing the user, the air flow direction can easily be adjusted to your individual processes as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR2800 the air direction reversal can be carried out with minimal effort.Both air volume and the degree of humidity can also be adjusted independently as required by means of the Duoventic control. The TTR2800 works based on theTTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation.Each of these two air circuits has a separate fan that can be adjusted independently via an infinitely variable electronic regulation. This enables the fine adjustment of moisture content and volumetric flow of the dry air required without the need to e.g. install energy-wasting throttle valves to regulate the air volume as has often been customary so far.Due to Duoventic you can configure the device to meet any requirement quickly and in line with demand without the need for conversions: Extremely dry air with a low air flow rate, larger volumes of dry air or maximum circulating air performance with a moderate ratio of dry air.
       
TTR 2800
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 2800
Decrease Quantity Increase Quantity
£18,999.99
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 3700
View Product
The TTR800 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 492 kg a day and air flow rate of 4.300 m³/h at 400 Pa. Even 500kilogrammes of dehumidification performance per day present no challenge for the TTR3700 – not even in cold ambient conditions with low dew points. Therefore the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial,haulageor theutility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.With the standard stainless steel housing and an electrical control box with protection type IP44 the corrosion-proof TTR3700 withstands even the harshest of environmental conditions and is therefore ideally suited for all applications related to dry keeping or the production of dry air at low temperatures or under particularly material-straining conditions – also in hygiene-sensitive areas.It is no coincidence that with the TTR3700 you benefit from an equally durable and easy-to-service construction – after all it is a desiccant dehumidifier originally produced by Trotec, developed and manufactured in Germany according to the highest quality standards, which houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers.Comprehensive standard equipment emphasises the excellent value-for-money ratio of this industrial desiccant dehumidifier: Be it electronic regeneration heating, rotation control, over temperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR3700 has many practice-oriented equipment features and thanks tonumerous equipment optionscan moreover be equipped precisely to meet your individual needs.Owing to the integrated Duoventic air volume regulation the TTR3700, working according to the TTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation, can further be adjusted precisely to the required degree of humidity and the dry air volume. For this purpose using Duoventic two separate fans can be controlled independently via an infinitely variable electronic regulation. As a result there is no need to install any energy-wasting throttle valves for air volume regulation.Configurable air direction reversalAnother practical detail for stationary industrial applications, especially with pipe connections, is the configurable air direction reversal of the TTR3700, for especially in those cases it must be possible to integrate new or additional devices flexibly into existing process sequences. With the operator side always facing the user, the air flow direction can easily be adjusted to your individual procedures as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR3700 the air direction reversal can be carried out with minimal effort.
       
TTR 3700
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 3700
Decrease Quantity Increase Quantity
£21,500.00
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 5200
View Product
The TTR5200 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 698,4 kg a day and air flow rate of 5.800 m³/h at 400 Pa.Be it to prevent corrosion damage resulting from condensate, to ensure the best possible manufacturing quality of stored goods susceptible to moisture, tokeep cooling zones free of iceor to accelerate drying processes as well as for the establishment of a climate-optimised production environment – the continuous provision of large dry air volumes even at very low dew points makes the constantly controllable TTR5200 an ideal dehumidification solution for many industrial applications.It is no coincidence that with the TTR5200 you benefit from an equally durable and easy-to-service construction – after all it is a desiccant dehumidifier originally produced by Trotec, developed and manufactured in Germany according to the highest quality standards, which houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers.Comprehensive standard equipment emphasises the excellent value-for-money ratio of this industrial desiccant dehumidifier: Electronic regeneration heating, rotation control, over temperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR5200 has many practice-oriented equipment features.But the TTR5200 has even more to offer. For the robust, low-maintenance and powerful unit we settled on a modular design, that way the device can be optimized as needed for any application requirement. Due tonumerous equipment optionsthe compilation of a virtually tailor-made solution to meet your individual needs can be realized quickly and without difficulty, e.g. with steam or gas regeneration energy instead of electric heating, additional microprocessor control for optimum energy management, touch screen for system control, GSM and WLAN remote connection, advanced temperature and humidity control – also depending on the dew point – and much more.In case of stationary industrial applications the TTR5200 further scores with its configurable air direction reversal. With the operator side always facing the user, the air flow direction can easily be adjusted to your individual processes as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR5200 the air direction reversal can be carried out with minimal effort.Both air volume and the degree of humidity can also be adjusted independently as required by means of the Duoventic control. The TTR5200 works based on theTTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation.Each of these two air circuits has a separate fan that can be adjusted independently via an infinitely variable electronic regulation. This enables the fine adjustment of moisture content and volumetric flow of the dry air required without the need to e.g. install energy-wasting throttle valves to regulate the air volume as has often been customary so far.Due to Duoventic you can configure the device to meet any requirement quickly and in line with demand without the need for conversions: Extremely dry air with a low air flow rate, larger volumes of dry air or maximum circulating air performance with a moderate ratio of dry air.
       
TTR 5200
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 5200
Decrease Quantity Increase Quantity
£24,500.00
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 6600
View Product
The TTR6600 is a powerful adsorption dryer for industrial application and convinces with a max. dehumidification performance of 892,8 kg a day and air flow rate of 7.200 m³/h at 400 Pa.With about 900kilogrammes of dehumidification performance per day and a nominal air volume of 6,600cubic metres of dry air per hour at a static pressure of 400Pa the TTR6600 is optimally prepared even for a high dry air demand in cold surroundings and with low dew points. Best prerequisites e.g. for permanent dry keeping, gas dehumidification or the production of dry air in thechemical,pharmaceuticalandfoodindustryas well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example inwater processing facilitiesor electrical control centres.It is no coincidence that with the TTR6600 you benefit from an equally durable and easy-to-service construction – after all it is a desiccant dehumidifier originally produced by Trotec, developed and manufactured in Germany according to the highest quality standards, which houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers.Comprehensive standard equipment emphasises the excellent value-for-money ratio of this industrial desiccant dehumidifier: Be it electronic regeneration heating, rotation control, over temperature protection system with restart lock, operating temperature management, G4 air filters in Z-line design with electronic monitoring and collective warning light, terminals external On/Off, terminals hygrostat or potential-free contacts for operation, fault and filter – already ex works the TTR6600 has many practice-oriented equipment features and thanks tonumerous equipment optionscan moreover be equipped precisely to meet your individual needs.Owing to the integrated Duoventic air volume regulation the TTR6600, working according to theTTR Trisorp Dual principlewith dual air circulation for pressure-neutral recirculation operation, can further be adjusted precisely to the required degree of humidity and the dry air volume. For this purpose using Duoventic two separate fans can be controlled independently via an infinitely variable electronic regulation. As a result there is no need to install any energy-wasting throttle valves for air volume regulation.Another practical detail for stationary industrial applications, especially with pipe connections, is the configurable air direction reversal of the TTR6600, for especially in those cases it must be possible to integrate new or additional devices flexibly into existing process sequences.With the operator side always facing the user, the air flow direction can easily be adjusted to your individual procedures as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR6600 the air direction reversal can be carried out with minimal effort.
       
TTR 6600
INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 6600
Decrease Quantity Increase Quantity
£27,500.00
1 2 | Next 
Portable Air Conditioning ET Range Portable Air Conditioning Split System Frigidaire Dehumidifier 60Hz
Industrial Dehumidifiers Ventilation Extraction Fans Wall Mounted Air Conditioning Unit
Industrial Cooling Fans INDUSTRIAL DESICCANT DEHUMIDIFIER AIR PURIFICATION
 
Fast Delivery